Is the oil reserve rate from the screw press due to the thickness of the cake of oil?

 What is the rate of residual oil from this screw oil press?

 Does it have something to do with the size of the cake?

 The output rate of oil from the screw oill press machine doesn't just refer to a specific kind of crop that produces oil, it it is determined by specific conditions. For instance, if you look at peanuts, the rate of oil production for peanuts ranges between 42 percent and 47 percent However, this is just an approximate summation. What is the rate of oil extraction of peanuts? It is difficult to make generalizations the peanut varieties, plantation, seeding and storage. Based on these knowledge it is important to boost the oil yield from peanuts. What can we do to ensure that the peanuts squeeze clear, make high-quality oil and improve the yield of oil? Let the technicians introduce the following issues to you:

 1. Peanut raw materials must be dried and then selected. The peanuts must be cleaned and dried prior to pressing. A lot of people do not bother with this process of pretreatment. The wrong peanut raw materials significantly reduce production of oil, they will also increase the wear on the press. In general, peanuts are fitted with a machine for peeling peanuts as well as a vibrating screening machine.

 2. The quality of peanut oil presses is a significant factor in the peanut oil yield. From the viewpoint of the equipment used in oil presses itself, it is primarily dependent in the squeezer's pressure, as well as temperatures of snails. The oil press made by our company is three stages of press. The process of oil extraction is divided into three phases, specifically that of the feed (pre-pressing) section as well as part of the pressing process (oil-out section) as well as that section for cake formation (heavy pressure oil portion). When squeezing is taking place the majority of the oil gets squeezed in the initial portion in the chamber which is in the the feed section and in the main press section.

 3: The oil residual amount in the cake could be excessively high. In the event that the cake's too dense and the amount of oil in the cake is excessive it will reduce the yield of peanuts' oils. Controlling the remaining oil rate as well as how thick the cake is an issue for numerous processing families. We advise customers to keep the cake's thickness between 0.8-2mm and to keep the residual oil rate to below 7percent.

 A good oil press will make it easier for users to avoid problems with oil processing. The model you choose can process oilseeds like rapeseed, cottonseed, soybean, peanut tea seed, and so on. When you purchase the machine, make sure to check whether the paint on the exterior of the machine is even, then check if parts of the machine are missing, then rotate the pulley with your using your hand to rotate it several times to determine if there is any foreign material like iron in the press chamber, or whether it's stuck. Also, at the same time take note of whether the meshing of the gear within the box of gears is in good condition.

Report this Page