Installing an HP 1320 Printer
The HP Laserjet 1320 is actually a desktop-sized individual laser printer. Printing up to 20 pages per minute, the Laserjet 1320 is best for smaller business applications or dwelling use. It can be compatible with each Windows and Macintosh platforms, and may connect by way of USB, parallel or network connections. Installation is rapid and straightforward when following the setup guide integrated with the printer.
Preparation
Get rid of the printer and all accessories from the box. Clear an region for the printer to sit. Verify that there is area for air to circulate by means of the vents. Collect together the paper tray, driver disks and cables for effortless access when required.
Initial Setup
Get rid of the tape from the covers and doors, and also the spacers from the paper tray. All orange tape and orange plastic spacers must be removed prior to powering the printer on. Adjust the paper guides in the tray for the largest setting, and load a little stack of letter-sized paper into the tray.
Remove the toner cartridge and give it a gentle shake for 5 seconds to redistribute the toner inside. Get rid of the orange clip covering the memory tag, and also the orange clips connected to the cartridge seal. Reinstall the toner cartridge and meticulously close the toner cartridge door.
Unwrap the energy cord, and plug it in to the back of the printer. Plug the other finish straight in to the wall outlet. Turn around the power switch and wait for the printer to come to its "Ready" state. Print a demo web page by pressing the "Go" button. Ensure that the print high-quality is acceptable.
Install Software
The CD ROM that accompanies the printer contains the printer drivers and computer software for the Laserjet 1320 Toolbox. So as to connect the printer to your laptop, you have to use run the CD. Load the CD into your CD drive and it's going to load automatically. Adhere to the prompts and load the software program. When the Install Wizard prompts you, connect your communication cable. The HP Laserjet 1320 can connect to your computer via a USB cable, 1EEE 1284-B Parallel cable, or RJ-45 Ethernet cable (should you have the 1320N configuration). Wait till the installation wizard tells you just before connecting the communication cable. When connected, print a test page to verify connectivity.
Computer software updates are obtainable from Hewlett-Packard's site. For those who don't have a driver disk, or wish to download one of the most recent version in the driver software, follow the hyperlink towards the HP Laserjet 1320 driver page in Sources.
Advertise on APSense
This advertising space is available.
Post Your Ad Here
Post Your Ad Here
Comments