Important Steps on How to Install Solar Trackers

One of the most intimidating steps within your solar power project is the installation of solar trackers. At the same time it is also more complicated than it truly is. Installing any solar panels, be it solar trackers or large solar carports, needs to maintain some interconnected stages. In order to install solar panels the correct way, you should take note of some important steps. These steps make sure that you secure maximum performance from your solar panels:

Selecting the Location for Mounting:

The first and foremost important action you need to do is to choose the right location to mount the devices. In many cases, the space may be a short one when you are trying to install a solar panel at home. This is the reason it is ideal to install the mounting system on the roof. You can also consider using a pole mount installation when you own a great deal of land. It can be more effective and sometimes easier than the other solar panels.

No matter what place you choose for installing your solar trackers, it is more important to maintain a consistency in unbothered access to the sun’s light. You need to make sure that you keep your solar panels as far away from trees and any other objects so that no shadows are casted on the panels. Remember, the shadow would greatly reduce the energy produced system.

Set Your Mounting Hardware Properly:

When you are placing solar panels on the roof or solar carports, it is always ideal to use pre-fabricated mounting hardware. This will ensure that the panels have been installed properly and this will be able to endure wind, rain, and other inclement weather.

It would be better to attach the mounting hardware directly to the roof’s rafters or use wooden blocks that span multiple rafters in order to secure the hardware. It is also beneficial to provide a strong foundation for the panels in the event of strong winds. It is also advisable to mounting solar panels to the plywood sheathing of the roof, as this will not create a strong enough foundation and you risk damage to both the panels and your roof if you do so.

Installing the Solar Panels Properly:

Once the mounting hardware is installed, it is your time to start securing the metal racks as well as railing. You should make it sure that water can run and wind can pass adequately beneath the solar panel. To maintain this properly, the solar panels should be installed at least three inches off the roof. In order to start with the installing process you need hardware, racks, and rails in place. You can use restraining hardware in order to secure the panels in place.

Determine the Proper Tilt Angle:

It is always important that you tilt the solar panels once they are installed for the maximum exposure of sun’s light. In order to maintain this matter, you should start calculating the right angle by determining the latitude of your home.