HP Officejet 4500 Printer Wireless Setup

by henry Henry The Global Blogs

Setting up an HP Officejet 4500 Printer is not as complicated. The appropriate guide will help you from the first step to the last. Patience is the key in such installations. So, make sure that you read the manual correctly and are patient enough to follow through the entire process of HP Officejet 4500 Printer Wireless Setup

Step 1 : First of all, unpack the printer carefully

Step 2 : Then remove the cables and install the disk.

Step 3 : After that, turn the box upside down and remove the foam packing

Step 4 : Then open the print cartridge bags and remove the plastic cover

Step 5 : Then plug in the HP Officejet 4500 printer wirelessly

Step 6 : After that, power on the printer

Step 7 : Then you’ll get a message regarding the Print Cartridges being missing

Step 8 : So, open the printer door and turn the printer off. Then turn it on again which will answer Why is my HP Officejet 4500 Printer Offline

Step 9 : You will have to give thirty seconds to allow the system to move the print head into the right place.

Step 10 : Then remove the plastic from the bottom of the cartridge

Step 11 : Then close the door and click on OK

Step 12 : After that, load the paper into the tray

Step 13 : Then press Ok, which will start the alignment process.

Step 14 : If you wish to connect to a wireless network, press the button on the far right.

Step 15 : Then you’ll see Setup Wizard. Click on Ok.

Step 16 : Select your network name.

Step 17 : Then you can easily print with the help of your printer.

Hopefully, the guide was helpful to you. Also, make sure that you follow the steps in proper order. Otherwise, there’s a chance that things may go wrong if you perform the wrong action at the wrong time. And no one wants errors like HP 4500 Officejet Printer not printing color. So, avoid making any mistakes.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on May 5th 2022 08:26. Viewed 197 times.

Comments