How You Can Disassemble iPad Pro for Screen Replacement?

The iPad Pro is the latest and most popular model of the Apple iPad family. Unlike the existing iPad models, this latest model features a large and more advanced display. It is the biggest to date and looks incredibly stunning. The screen is one of the standout features of this generation of iPad, and most often users seek assistance from authorised service centres due to screen damage. But, when it comes to the latest generation of iPad repairs in Gold Coast, it is as difficult as the other iPads to teardown or replace the screen. Scroll down and read the article to know the tools and steps required for successful iPad Pro screen replacements.

Tools needed

• Heat gun or hair drier
• Screen suction cup separator
• Case opening tool
• Screwdriver

Necessary steps

• For iPad screen repairs in Gold Coast, the very first step is to power off the device. After that, make sure to heat your iPad Pro around the edges to soften the adhesive underneath. This will help to loosen up the front panel, thus making it easier to pull out. 
  
  
• Pull up the LCD assembly from the rear housing carefully until there’s a tiny gap, then insert a case opening tool in between. Then, make sure to run the tool around the edges to release the LCD assembly of your iPad Pro. However, it’s important to take note that you must be careful not to bend the flex ribbons. To avoid scratching the rear housing, it’s best to use a plastic thin case opening tool.
  
  
• Undo the three screws and get rid of the metal bracket that is covering the connectors of the screen flex ribbon.
  
  
• You need to pry up the two connectors to remove the LCD assembly. However, you must keep in mind that the actual disassembly work is not that much easy as it seems. Professionals spent more effort and time on step two than expected. It’s always recommended for inexperienced individuals to send their iPad Pro devices to professional repair shops or Apple service centres for screen replacement if necessary.
  
  
• Pop up the four screws securing the loudspeaker module of your iPad Pro. Then, lift it carefully, it’s glued by strong adhesive and remember to avoid damaging the flex ribbons underneath.
  
  
• Also, you need to remove the rear-facing camera of your device for iPad screen replacement in Gold Coast.
  
  
• After removing the rear-facing camera, make sure to release the antenna cables of your iPad Pro.
  
  
• Now, you have successfully disassembled your iPad Pro for screen replacement.

Hope, you have understood how to disassemble iPad Pro for screen replacement. If you like the content of this article, don’t forget to share it with your friends, and get back to us for more exciting content!

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Mar 16th 2022 04:06. Viewed 97 times.

Share on APSense

Comments