How To Use Tile Trim And Tile Edging
by Kevin Ho Kingoals Aluminum Co., Ltd.1.
Disadvantages When Installing Without Tile Trim:
A. Need a lot of work to
polish the tile edging.
B. If select ceramic tiles
with poor quality, there will be uneven edge, and easy to be damaged when
polishing the tile edging.
C. After grinding the tile,
the edge of tile would become thinner, fragile, easy to crack.
D. Edging noise and dust
pollution, does not meet the trend of environmental protection.
E. A long time, tile
docking will have a gap, into the dust dirty unsanitary.
2.
Advantages When Installing With Tile Trim:
A. Installation is
convenient, labor-saving, time-saving, material saving. When using the angle of
the tile or stone do not have angle, chamfer, tile and stone will be attached
to the master only three nails to complete the installation.
B. Decoration beautiful,
bright. Angle arc smooth, straight lines, can effectively guarantee the package
side paste angle straight, so that the corners of the decoration more
three-dimensional beauty.
C. Rich colors, can be the
same color, so brick surface, edge line consistency, can also be used in
different colors, in contrast.
D. Can well protect the
corners of the tile.
E. Product environmental
performance, the use of various raw materials on the human body and the
environment without adverse effects.
F. Safety, arc relief right
angle to reduce the harm caused by the collision.
3.How
To Use Tile Trim:
A. Use three nails to fix
the tile trim to the installation so that the tile line is parallel to the
wall. (Note: When the angle is fixed, the reserved corner must be the same
space as the thickness of the tile used for tiling connection with the tile on
the other side.
B. Tile adhesive or cement
tile shop in the corner line, affixed to the tile, tile angle to keep the arc
surface and tile joints close.
C. Shop the other side of
the tile, with the tiles close to the angle line, to maintain contact angle
line with the tiles smooth, seamless.
D. Laying tile trim properly,
the tile angle and the arc surface wipe clean, the installation is complete.
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.