How to use Nissan Consult 3 Scan Nissan OBD2 Code

by Magic Lee obd2repair

Nissan Consult 3 is obd2repair diagnostic tool for almost all Nissan car models. Scan Nissan OBD2 Code then look up the meaning of the codes in the Nissan's owner's manual can help you diagnostic your Nissan cars and keep it healthy. Do you know how to use Nissan Consult 3 Scan Nissan OBD2 Code?

Nissan Consult 3 Scanner Consult III Nissan Diagnostic Interface

Here are the instructions of how to use Nissan Consult 3 Scan Nissan OBD2 Code shared by OBD2Repair

Step1: Put the key into the ignition and turn it to the "on" position.

Step2: Connect the Nissan Consult III with your car's OBD-II cables

Step3: Locate the trim panels in the front part of the center console.

Step4: Remove them using a screwdriver.

Step5: Find the Nissan's OBD-II computer, which is attached to a bracket on the transmission tunnel.

Step6: Rotate the diagnostic mode selector using a screwdriver. choose the right mode of Nissan Consult III obd-ii scan tool, This is a small hole that can be found on the side of the computer. Turn it until it won't go any further. Next to the hole are red and green LED lights.

Step7: When these lights quickly flash three times, immediately turn the Nissan Consult III diagnostic mode selector counter-clockwise until it won't turn any further.

Step8: Notice the flashing red and green lights of Nissan Consult III, and count how many times each of them flash. The red lights are the first digit and the green lights are the second digit.

Step9: If the red light flashes four times and the green lights flash two times, then the error code is "42."

Step10: Turn the vehicle off and put the trim panels back in place.

Step11: Look up the code numbers of Nissan Consult 3, and in the owner's manual to understand their meaning.

Nissan Consult III support Languages:

1.English, 2.Finnish, 3.French, 4.German, 5.Greek, 6.Italian, 7.Japanese, 8.Spanish, 9.Chinese(Traditional), 10.Chinese(simplified), 11.Russian.