How To Use A Table Saw For Cutting Plywood?

Undoubtedly, a table saw is a very handy tool for woodworkers, carpenters, and DIYers. When used rightly, this table saw can produce the best results as it can always make cleaner, safer and straight cuts. As suggested by some of the reputed roller press machine manufacturers, one should not just buy a table saw and start using without reading the instructions and knowing a safe way to use this wonderful tool. The purpose of this short article is to educate the newcomers or hobbyists how to use a table saw to cut plywood in a safe and successful manner.  

Choose the right blade: The blade is like the heart of your table saw. Hence, you need to use the right blade that goes well with the given load, that is, your plywood. Remember, the blade that comes with your table saw may not give you the best results, as these blades are designed to make rough cuts on the construction-grade soft timber. Hence, you need to choose the right blade according to your application. All you need to do is to upgrade your blade. Most of the experts prefer the commonly known 80TPI plywood blade that can perform all types of cuts, including the rip cuts. Remember the fact that even a powerful blade can become useless if you apply a wrong technique to use it. 

Utilize the zero-clearance option: As recommended by the woodworking machinery suppliers India, you need to choose the zero-clearance insert for making accurate cuts. Such action will close the gap around the saw blade in the shoe. You can also buy a sell-out insert that comes as an accessory. Experienced carpenters make their own insert. Most of the suppliers of the table saw offer tutorials on how to make a zero-clearance insert in order to make high-quality cuts on plywood if you are a beginner watch such video-tutorials which can be handy to make the cuts with greater accuracy. 

Put Your Safety First: In general, power tools have a tendency to cause dangerous accidents if proper care is not taken by the operators. In this contest, you need to consider your safety first instead of making a quality cutting. A powered table saw is no exception to this rule. Hence, you need to take extra precaution while cutting the plywood in a table saw. You ought to wear safety glasses as prescribed by the supplier as well as face shield or goggles during the time of operation. You can also wear the mask to prevent the dust that comes out while doing the cutting. Wear the right footwear and avoid using dangling jewellery and loose-fitting clothing, 

Use a sharp blade: While cutting plywood, it is generally recommended to use sharp blades in order to cut the plywood correctly. This is to avoid any type of splintering while cutting the plywood. As a marketing strategy, most of the blade suppliers sell their products with a razor-sharp. Of course, over time, these blades tend to lose their sharpness in accordance with their workload. As an operator, you should also know the technique of sharpening the blade used in your table saw, so that you can sharpen it when the need arises. Also, handle the blade with great care, especially while fixing it on the tool. Ensure the blade is in the right position before making the wood cutting tasks.

Prevent Kickbacks: The term kickback indicates the sudden and automatic movement of the tool or the load, namely the wooden piece. This is a common but dangerous issue faced with most of the power tools. More often the table saw too offers such kickbacks, and hence the operator needs to be alert all the time, especially when fixing the load to the speedy blades. As per the experts, the aspect of pinching or binding of the wood piece can be the cause for such kickbacks. All, you have to do is to raise the blade height and ensure in setting the blade to come off the wood at the gullets, which are the valley points of the teeth of the blades. 

After reading this article, hope the readers like you have learned some tips on how to use a table saw to cut the plywood. In addition to these tips, there are more precautions you need to take while using the table saw. With these tips, you are sure to make cleaner and safer cuts on the given plywood. The quality of cuts you make depends on the techniques you have used, as stated in this article. More than quality, the aspect of safety should be your concern. Making a safer and the right cut does not come in your first few attempts. To achieve perfection, you need to have a lot of interest, combined with perfect practice, both of which come with experience. 

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Nov 22nd 2019 04:23. Viewed 465 times.

Share on APSense

Comments