How to resolve Error Code OXC4EB827F in HP Envy 4500

If you are suffering from a problem on the HP printer which is flashing on your computer system as Error Message OXC4EB827F, then don’t panic. This message usually occurs because of Ink system failure. When this error code shows on your PC, then your HP printer will stop printing, scanning or copying.

 

The other causes of this error code OXC4EBB27F could be dislocated encoder strips, old printer driver issue, dirty hardware and corrupted registry entries in the computer system. Whatever is the reason behind the bad condition of your printer, you just don’t need to worry about it. This is because we are going to mention the perfect solution to fix the HP Envy 4500 error message, which will solve the problem and fix the issue.

You need to carefully follow these steps which will help you in fixing the issue.

Step 1: On printer & remove Ink cartridge

•    The very first step you need to do is switch on your HP printer and then remove the ink cartridge from it.

 

Step 2: Disconnect the power cord

•    Further, disconnect the memory cards and all the cables from the printer. From the backside unplug the power cord when the printer is turned on.

•    Unplug from the other side of the cord.

•    If there is a power module on the power cord, unplug it too.

 

Step 3: shut down your Personal Computer

•    Now, shut down your PC on which you are working.

•    You can switch off the Wi-Fi router for solving the issue without wasting your time.

•    After this, wait for at least 60 seconds as it is suggested by HP tech experts.

Step 4: Connect the cord

•    Furthermore, connect the cord into a wall outlet.

•    Now, simply attach the power cord to the back of your printer.

•    After this, the HP printer should power back up. If it doesn’t turn on start it with the power button.

Step 5: Install cartridges

•    Now, you need to install all cartridges

Step 6: Make a Copy of Backup

•    In this process, you need to make a copy of the backup.

Step 7: Turn On the printer

•    Now you have to power on your PC.

•    You can turn on the wireless router too.

Step 8: Start your Printer

•    You can now start your printing and see the issues that are facing are fixed or not.

•    Also, photocopy a document to check that all the cables are attached in an efficient manner.

Step 9: Attach the Other Cables

•    If you need to attach any other cable to the printer then you can connect it too.

After performing above-mentioned steps if you still facing any issue with your HP printer, then you can contact our HP technical support phone number to resolve Error Code OXC4EB827F in HP Envy 4500 by our experts. They will give you the best possible solution to your issue. They will help you in fixing this error message.

I am John and working as a technical writer from past some years and I have written almost many articles on these kinds of issues related to HP printers. If you have any issue with your HP printer then you can easily reach on HP printer support number to resolve the issue.