How to Reset Hp printer Cartridges?
The HP printer ink cartridge is set to reset to use a refill kit for the cartridges. For some printers, cartridges
do not require resetting, but for some printers, it needs a hard reset.
It is done to reset the ink level so that it can read full in the
pop-up ink-level window. There are some step by step instructions given
by HP printer support NZ, to reset HP printer Cartridges. These steps are planned by our technical team carefully; you need to go through them accordingly.
Further, you can give us call through the HP printer tech support number NZ - +64-04-8879109 , in order to get online assistance from our experts.
Step1- Rotate
the ink cartridge over so that you can have a look of structure, move
it so that makes you to see copper contacts at the bottom of the
cartridge.
Step2- Get tape
over the top contact in the second row from the left side of the ink
cartridge as it will be the seventh copper contact. Adjust the ink
cartridge in the printer and the printer will run the alignment.
Step3- Take out the ink cartridge after the alignment is finished. Put on the tape on contacts.
Step4-Put tape over the top contact in the second row from the right side, it is the sixth copper contact.
Step5- Change the ink cartridge in the printer and let the printer run the alignment page.
Step6- Take
out the cartridge after the second alignment. Remove both pieces of
tape and ensure that you remove the entire adhesive residue.
Step7- Put the ink cartridge in the printer carriage. The printer will show ink level as full in displaying window.
original Source
Advertise on APSense
This advertising space is available.
Post Your Ad Here
Post Your Ad Here
Comments