How to Repair Small Cracks in Your Ceramic Tiled Floor?

It is often that ceramic tiles used on floors are found to develop small cracks. You can repair these hairline cracks all on your own with the help of tile repair kits, or with some basic stuffs that are ready available.

Having a floor fitted with ceramic tiles can look beautiful. You can find hairline cracks developing on your floor ceramic tiles for different reasons. If the tiles were set up over concrete that had just been laid, cracks could develop once the concrete solidifies. Dropping heavy objects, like a hammer or a cast iron skillet, can also make your tiles develop cracks. Regardless of the cause, you can do something to repair the cracks all on your own with the help of tile repair kit Australia. There is no need to get a professional repair service provider. Once repairing is done, your tiles will look like new again. Use the following steps to do the repair job.

First of all, you will have to gather a few things. These include a bottle of clear urethane, dry cloth, toothpick, oil-based paint, bottle of clear epoxy resin and an artist’s brush with a fine tip. You may consider buying ceramic tile repair kit Australia, although getting the aforementioned items can mean greater cost-savings for you.

Clean the cracks

Use warm water and soap to clean the cracked spots. This will remove all traces of dirt and dust from them and allow them to be treated well. Rinse the area, and use a dry cloth to pat them dry. You may also use a hair dryer to get the cracked spots dried thoroughly.

Apply epoxy to the cracks

Find out the small cracks and apply the clear epoxy resin onto them. As the cracks are hairline, you will do better to use the toothpick and push the epoxy into each of them. Make sure that the cracks are completely covered by the epoxy compound. Let the resin dry for a few hours. It is best to avoid touching the surface for a whole day.

Apply paint on the cracks

Next, you will have to use the oil-based paint that closely matches the color of the ceramic tiles on your floor. Use the artist’s brush and moisten its tip with a little of the paint. Apply this on the cracks. Thus treated, the naked eye would be unable to spot them from non-cracked areas of the tiles. This type of treatment can be as good as using chipped tile repair kit Australia for the rectification purpose.

Use urethane cover

Once the paint dries on the cracks of your tile, make use of some layers of the clear urethane to cover up the cracked tiles. This will help avoid wearing away of the paint, as well as safeguard your ceramic tiles. It is a good idea to apply the urethane again after every couple of years, as and when needed.

In case your house has recently been constructed and you find the cracks to have developed, it is a good idea to delay the repair work until the flooring settles completely. Otherwise new cracks may develop even after you carry out the repair work, due to the shifting floor.