How to Install Marble for Flooring and Wall Cladding?

Summary:

This article describes the methods to follow to install Italian marble for wall cladding and other projects in your property. If you are a newbie, this guide will be handy for you to learn new things and avoid creating mistakes.

There is no doubt that marble tile floors are elegant in appearance. This adds value to the property and highlights your standards as well. However, the installation of Italian marble for wall cladding, flooring, and other types of construction works is not that simple. In order to create a beautiful space with this material, you must check the guidelines to avoid mistakes.

Although hiring a professional installer is the most convenient and appropriate way, you must be aware of the basics to deal with this project confidently. Let’s understand how to start with the installation of this natural stone in the foyer or living room or bathroom floorings-

First Comes First – Prepare the Base

In the very beginning, you have to prepare the base for ensuring the appropriate sticking of marble on the floor. Suppose you want to modify your existing floor, it is crucial to remove the covering and add a layer of cement to ensure sturdiness. Check the surface level before installing marble tiles such that there would be no sloping or inclined surfaces.

Next – Measure and Cut

After the completion of first step, you have to measure each tile and make appropriate cuts to avoid wastage. To make things practical, you are asked to measure twice and pick the right tools for avoiding chip off or breakage of tiles. Experts say that it is always good to use a wet saw to ensure the right cut on marble tiles and slabs.

Next – Set Mortar and Tiles

To fix them on flooring or walls, there is a need for using mortar. You have to mix it well and spread it with a trowel to set the marble firmly. It is advised not to tap too hard on them to avoid breakage or crack. After this thing, you have to wait for at least 24 hours to let it dry up. This is how you could complete the setting up of natural stone.

Next – Clean and Seal

On the very next day, you have to clean the surface with a wet sponge and go ahead to apply the sealant. It helps you prevent scratches and stains on the surface. Again, you have to leave this area for the next 24 hours to let it dry up. In the next visit, it is crucial to use a damp sponge to clean the surface properly and then wash the surface.

Final Thoughts

You might have understood how to install Italian marble for wall cladding or flooring or any other types of construction projects. This is a very common method but there might be a need for a change depending on the condition of property. This is why you are asked to find a good supplier cum installer for your residential/commercial needs. As experts are well-aware of the techniques, they employ the latest methods to avoid errors and make things practical.

So, don’t waste your time and look for a reliable agency for your project. You can even request a free sample to check their products and ask for a quote before you go ahead to hire anyone.

Author Bio:

The author has a very good knowledge of installing marble tiles and slabs. He also assists individuals in buying the right type of natural stone for residential or commercial needs. Recently, he joined a blogging site to write informative posts related to installing Italian marble for wall cladding, kitchen backsplashes, flooring, etc.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jul 22nd 2022 01:30. Viewed 196 times.

Share on APSense

Comments