There are different types of wall, on which display boards can be installed, regardless of whether the boards are plastic, wooden or paper. There are a lot of methods, which you can apply when you decide to install display boards on different types of walls or backgrounds. Some types of display boards can be installed more easily than others, depending on what specific wall you want to mount the display boards, so you should be informed about the different options. You might find some of the options, sitting comfortably in your house and the others you'll find in the closes home improvement store.

Here are a couple of options that you might consider when you decide that it's time to mount new display boards:

• Tape

Firstly, you have to cut a piece of tape for every single corner of the paper display board. You should use scissors to cut out the tape. You have to cut four pieces of tape, because display boards have square shape. However if their size is huge then you should cut four additional pieces, just to be sure and to proved extra support between the corners. After that you move on to the folding part of the process. Fold each single piece of the tape in a circle form , but bear in mind that the adhesive side has to be on the outside. Then place each of the four folded pieces of tape in each corner of the backside of the display board and one between the corners, again on the backside.

The final part consists of placing the display board against the wall and apply significant pressure on each corner and tape of the display board. By performing this, you have successfully mounted the display board.

• Adhesive Tags

The first thing that you have to do is to dispose of the protective layers on these tags. A good choice for your paper display boards is the usage of adhesive tags, because they match just perfect. You have to place an adhesive tag on each of the corners of the display board. Again, like with the tape, if the board is a bit large, then you should add extra tags. Dispose of the protective layer of the adhesive tags so you can have sticky sides.

Again, same as with tape, you just have to place the board against the wall and apply pressure towards the wall, so you can make the board stick to the wall. When the tag are accurately placed on the back, then you need to apply pressure.

• Hardware

Use screws and a screwdriver to mount display boards, in cases in which they are made of wood or plastic. Then go on and draw four marks on the wall where the display board needs to be mounted. The marks should line up with each single corner of the display board. Drill four holes in display board, one in every corner. Do this whether the display board is wood or plastic. The holes should match up with the corner markings made on the wall. Insert a screw into each of the drilled holes in the display board. Use the screwdriver to mount the display board to the wall, lining the screws up to the marks on the wall. Keep screwing until the display board has been mounted securely and safely.

Examine each of the options that were mentioned above and decide which is the best for you and for the appearance of your home. If you experience some difficulties with the decision, then it would be better to just call ​handyman in Putney and let them take care of the project, instead of you.