How to Fix "Unable to Print 76" Error on Brother Printer?

"Unable to Print 76" Error on Brother Printer usually appears because of any power fluctuation happened. Printers sometimes couldn't handle frequent power fluctuations; especially when it is in between doing its job.

Getting this error will surely stop all your printing job along with showing brother printer offline at times. That means this situation demands the utmost attention.

Well, don't worry this error can be resolved by taking your printer into maintenance mode. This article is dedicated to the same. Read carefully to learn how can you make brother printer error 76 go away and troubleshoot brother printer not printing from phone issue.

Troubleshooting Brother Printer Error 76

Getting your printer into Maintenance Mode and existing back can fix the problem.  You need to follow specific steps in a particular order to let this trick work for you.

The twist of this hour is; there are two methods to get your brother printer into "Maintenance Mode." The following check out; what these are:

Method1: The Manual Method

Step1: Turn off the printer.

Step2: Press and hold down the Menu button.

Step3: Turn ON the machine while holding down the "Menu" button.

Step4: Press the No. 9 ( i.e., 9, 9 )button twice; when you display shows "Maintenance."

Doing this will "Reset Brother Printer," and the printer will reboot from a fresh. This will fix the error, and you won't see "Unable to Print 76" error again. Your printer is now ready to print for you again.

Method2: The Numeric Combo Method

Step1: Press Menu,*,2,8,6,4 button one after another without any gap on the printer.

Step2: When done correctly; the printer will understand and go into the Maintenance.

Step3: The printer display light will start blinking, and the display will show a message "Maintenance."

Step4: The printer will work on it's on, next you need to exit from this mode.

Step5: Double press "9" digit button printer to exit from this mode.  

The Printer will then come out from the maintenance mode and restart normally.

Following these steps will resolve your  Brother printer error 76. There is another way to fix this problem, and that is replacing the fusing assembly.

It is not a good idea to experiment with replacing fusing assembly for a non-specialist. You better should get brother printer support from the expert technicians. Dial the toll-free brother printer support phone number  USA/Canada: +1 888-480-0288 & UK: +44 800-041-8324