How to Ensure Wood Heater Burn Throughout the Night?

by Heat Master Heatmaster

The winter could be mercilessly cold in some parts of the country. This increases the need to keep the indoor temperature of the home warm and cozy. There are various alternatives to control indoor temperature. One of the most popular and most used is the Wood Fire Heaters Melbourne in the homes.

The nights get even colder; it becomes even harder to keep yourself warm sometimes. This necessity induces the requirement of keeping the home warmer all night long. The Wood Heaters Melbourne requires you to put the wood log after a certain time to keep the fire running. How is it possible to keep the wood heater running when you are asleep and would not be able to put the log in the heater after a certain time interval?

Here are some of the ways that would allow you to keep the heater running all night long and enjoy a warm sleep.

Choose The Wood Logs Wisely

The different wood has a different burn time. One of the biggest impacts in keeping the wood heater is the wood logs. The more wisely you choose them, the more average run time you would get. There are also various other factors that would impact the average burn time of the logs.

Stack The Wood Strategically

Stacking the wood has an impact on keeping the fire running all night long. Make sure that you stack the softwood at the bottom of the stack and the hardwood logs on the upper part of the stack. This would increase the burning time of the wood heater.

Do Not Forget to Remove the Ash

One of the important parts when using the wood heaters is to dispose of the ash properly the next morning after using the wood heater all night long. It would not just get rid of the ash but would make good space for stacking the log for the next day without creating any mess. Make sure to use various ash removal accessories to complete the process properly.

Lower The Burn Rate

Various factors impact the burning rate of the logs. If there is a good amount of oxygen supply, that means the combustion would take place more easily. It increases the amount of burning speed of the logs and keeps them running for a considerably lower time.

If the size of the log is comparatively smaller than required for the wood heater, this will reduce the burning time of the logs. The moisture content in the logs also impacts the burning time. The lesser the moisture content, the drier the logs. The drier they are, the more combustion will take place, increasing the speed of burning of the logs.

So if you wish to reduce the speed of burning of the logs, reduce the supply of oxygen, select the logs wisely, and take the moisture content of the logs into consideration.

Do not forget to put safety measures in place if you are willing to Wood Heaters Melbourne for the whole night.