How to Correctly Use Feed Grinding Machine
by Lilian Lee saleman1. Fixed in the cement foundation.
2. Check the fasteners after being installed.
3. Check whether the belt tightness is appropriate and whether the motor shaft and grinder shaft are parallel.
4. Before starting the feed grinding machine, the operator should rotate the rotor by hand to check whether teeth claw, hammer and rotor are flexibly operating, whether rotors’ rotating direction is gestured in the correct arrow orientation, whether the lubricant conditions of motor and grinder are good.
5. Do not frequently change the belt pulley in case the rotating speed affects normal operating.
6. Keep the machine no-load running for 3 minutes, if it has no abnormal occurrence then put raw materials.
7. Pay attention to the operating condition of feed grinding machines to avoid blocking and long-term overload running.
8. Carefully examine the feed ingredients to avoid hard objects such as copper, iron, stone etc entering the pulverizer and causing accident.
4. Before starting the feed grinding machine, the operator should rotate the rotor by hand to check whether teeth claw, hammer and rotor are flexibly operating, whether rotors’ rotating direction is gestured in the correct arrow orientation, whether the lubricant conditions of motor and grinder are good.
5. Do not frequently change the belt pulley in case the rotating speed affects normal operating.
6. Keep the machine no-load running for 3 minutes, if it has no abnormal occurrence then put raw materials.
7. Pay attention to the operating condition of feed grinding machines to avoid blocking and long-term overload running.
8. Carefully examine the feed ingredients to avoid hard objects such as copper, iron, stone etc entering the pulverizer and causing accident.
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.
Comments
No comment, be the first to comment.