How To Configure Dlink Router Sharing Settings?

Posted by harry smith
2
Oct 7, 2016
172 Views
Image

D-Link router are very vast use majority of the general users from all parts of the. D-link users often face the problem of configuring their router’s settings for which they contact the Dlink help desk.

Mentioned below are the steps to configure your Dlink Router Sharing Settings:

  •  Step 1: Connect to Internet on your 3G data stick.
  •   Step 2: Plug laptop to router's ports.
  •   Step 3: Visit Control Panel, then click on View Network status and tasks and after that, click on Change adapter settings
  •  Step 4: Right click the modem → Status → Details.
  •   Step 5: Note the IPv4 DNS Servers.
  •  Step 6: Right click the Local Area Network -> Status -> Details.
  •   Step 7: Note the IPv4 Default Gateway.
  •    Step 8: Enter the IPv4 Default Gateway on the browser.
  •    Step 9: Under WAN, choose "Static IP".
  •    Step 10: enter your WAN IP to 192.168.137.2, Net mask to 255.255.255.0, Gateway to 192.168.137.1, DNS Server(s) to the "IPv4 DNS Servers".
  •   Step 11: insert wire in  WAN port.
  • Step 12: Go to Network connection -> Properties -> Sharing.
  • Step 13: Then, check the box next to Allow other network users... as the second last step.
  • Step 14: Make sure that your IPv4 address is "192.168.137.1" as the final step of this procedure.

In case, you forgot your password, contact us for the Dlink router password recovery. You can anytime contact the Dlink Router Phone Number to get the best help for your issues 24 X 7 and 365 days. Our technical experts are always ready to provide you the basic troubleshooting steps. You will be guaranteed the 100% customer satisfaction by contacting us.


Comments
avatar
Please sign in to add comment.