How Rustic Wood Flag is Made in a Simple and Convenient Manner

by Rush Woodworks Wooden American Flag Company - Rush Woodworks

American woodworking company - Rush Woodworking

If one is keen to possess a beautiful and inspirational source of Rustic wood flag, then it is not difficult at all. Just follow the list of important things required for making the wooden flag and later on, the procedure of actually making it. On reading the write-up the curious person will find it quite interesting and convenient to follow it also.

This, when executed properly, will make you feel too happy and you will get inspired also.

First of all, arrange things that are required to make the quality wooden flag.

One 15’’ the length of the pine wood. The measurement required for this is 1x 12 boards.
Then you require five pieces of 8 foot and ½ pine boards.
Not to forget about the quality of wood glue.
Then you require a miniwaxTintable Water-based Stain. (This will help you in lowering down the effect of the colors. Like – scarlet and True Blue.

Now, you also require a picture hanging wire, 2 washers, 2 screws for the hanger.

Now, the user will get to know about the right instructions of making it –

Initially, make sure of cutting evenly 37” stripes.
Now, also cut 27’ stripes.
Cut four 19” braces for the back portion.
Now, just cut, 10.5” x 15” panel.

All the American wooden flag company experts suggest that you round over the front edges perfectly. This is done with the round over bit in a router.

If one is keen then make use of the blow torch. This way you will receive a burnt type of look.
One can stain three 37” stripes and four 22” stripes of scarlet red.
Now, you can stain the panel with True Blue color.
At this stage, the maker of the flag can now add the stars on the panel.
Now, stick the flag together with using the minimum quantity of wood glue. This way you will not face the problem of the glue getting squeezed out.
All the American wooden flag company wants the maker of the wooden flag to bind the flag together.
In this stage, the maker requires connecting the four braces on the back with the glue and nails. Be precise in making sure that one brace does overlap the joint. This should be between the union and the stripes. Also, make sure that proper space is maintained.
In the last step, just spray the clear coat finish.

The American Woodworking Company suggests that if the maker of the wooden flag does not have a well-calibrated CNC machine (Computer Numerical Control) then look out for the other ways of adding the stars onto the panel.

Paint and Stencil – Make use of the stencil to paint the stars.

Hand Carving – First of all make use of the paper template for acting like a guide to carve the stars with a sharpened carving knife.

Dermal Tool – First of all, draw the stars to draw the panel using the template. Later on, engrave them with the help of the Dremel Tool.