How Diamond Clarity Affects Value Of The Rings?
by Andrews J. JewelersThe
most common confusion that almost every inexperienced diamond buyer sustains is
whether to choose an inclusive diamond or non-inclusive diamond.
Without
knowing the difference between the two, often people choose to buy one without
inclusions. Although a diamond without inclusions seems clear, this isn’t
always the best choice.
Regarding
the importance of clarity in diamonds and things to be taken care of to get the
best value of the diamond, we talked with one of the highly-skilled,
experienced and reputed jewelers of Buffalo.
Dive
in the blog to know how clarity of the diamond affects its value:
What is Clarity in Diamonds?
Before
you know what clarity of diamonds you should choose to buy for engagement
rings/ diamond rings or any other jewelry piece, you should know what clarity
is?
The
clarity in diamonds is a qualitative metric that grades the visual appearance
of each diamond. The amount of “inclusions” or “blemishes” in the diamond
determines its clarity.
As
per our expert of an online jewelry store, inclusion is an imperfection,
basically, cracks or small minerals located within a diamond. They are created due to the extreme pressure
and heat which the diamond’s experience while they are being manufactured.
On
the other hand, blemishes occur after a diamond's formation, during the
cutting, mounting, and wearing of a polished diamond. Extra facades, polish
lines, or burns (from excessive heat on the polishing wheel during cutting) are
examples of blemishes that are obtained during the manufacturing process.
How is clarity grade determined?
If
you’re heading right to buy one of the best diamond engagement rings for your
partner, but aren’t able to differentiate diamonds on the grounds of their
clarity grade, then here’s how you can know the clarity of your proposed rin.
Our
expert of Online Jewelry Store brought us into our notice, that to check the
clarity grade of diamonds, graders make use of the lens with 10X magnification,
the industry standard.
The
diamond for rings with the highest clarity grade would certainly show fewer
inclusions, whereas, in the diamonds whose inclusions can be seen with the
naked eye is supposed to have lower clarity grade.
The Dependency of Price on The
Clarity of Diamonds
When
you are in search of one of the engagement rings that doesn’t hit your pocket
hard and gets available in your supposed budget, you need to be realistic and
strike a balance between your requirements.
While
the other 3 out of the 4C’s is highly noticeable, clarity is often the
attribute that you can make compromises on without any detrimental impact on
the diamond’s appearance.
Below
is the table that can give you an overview of how hard different clarity grades
can hit your pocket.
Different Clarity Grades Approx. Price Increase (%)
SI2-SI1 12%
SI1-VS2 22%
VS2-VS1 9%
VS1-VVS2 13%
VVS2-VVS1 28%
VVS1-IF 22%
From
the chart above, you can see that there gets a tremendous difference in the
prices of diamonds for rings of different clarity grades.
While
there is only a difference of 5 clarity grades from SI2 to VVS1, it results in
a gigantic increase in prices!
How much should you
prioritize diamonds?
Diamond
clarity is not the most important “C” of the 4Cs. As per our expert jewelers of
Buffalo, “cut” and “carat” are more important than clarity because they can
affect how well the diamond reflects light and how much will it weigh.
Cut
can make a smaller diamond appear larger and can also cover flaws within the
diamond. Whereas carat will augment its value at the time of resale.
Undeniably,
the diamond for rings with perfect cuts can certainly be more expensive as more
coarse material is detached and highly skilled labor is incorporated for the
polishing job.
When
it comes to a carat weight, this is a significant facet of diamonds for rings
that affect the price. The prices of diamond engagement rings are directly
proportional to the size and weight of diamonds used in them.
The
other 2Cs are color and clarity which features the diamond’s physical
properties. The price of engagement rings is likely to swell with improved
color grades.
As
said above, clarity doesn’t hold that much importance while buying a diamond for rings.
Thus, you can choose to have a diamond with a lower clarity grade which would
look the same to the naked eye.
From
the blog above, you now know that each of the four attributes plays a vital role
in determining the price of a diamond. However not every attribute puts the
same level of impact on the diamond’s appearance. Thus, if you are low on
budget but still need to gift one of the most beautiful diamond wedding rings
or engagement
rings to your partner, then you can go with a ring that has relatively low
clarity. By doing this, you will be able to buy the precious and most striking
token of your love without even breaking your budget.
Experience
the best quality diamond wedding rings and engagement rings at affordable costs
from the highly reputed and renowned jewelers in Buffalo “Andrews Jewelers”.
Visit our online jewelry store to order the ring today!
Sponsor Ads
Created on May 28th 2020 00:45. Viewed 261 times.