How can I Setup Tenda AC1200 Router?

Everyone is addicted to the internet that so everyone wants their devices to be connected to it 24 hours a day, seven days a week. If you use a wired network, you may have several challenges, such as having to sit in one location. You make every effort to use wireless networks. Tenda is one of the most effective wireless network routers on the market. The challenge now is how to set up the Tenda AC1200 setup router. So, let's find out what the answer is. Before learning how to use the Tenda AC1200 router, you must first learn everything there is to know about the Tenda router. As a result, allow some light in. It is one of the many fantastic wireless routers available. With a powerful network, it can reach huge distances. The Tenda router comes at speeds ranging from 150 to 300 Mbps. It has a large bandwidth capacity.

Techniques To Setup Tenda AC1200 Router

There are many methods for the Tenda AC1200 router setup. Let's study them one by one in detail.

Tenda Router Setup with LAN Port:

• Undeniably, it is one of the most crucial techniques. The following is a step-by-step guide for this procedure.

• Remove the router from the packet first, and then connect it to the power adapter.

• With the help of an ethernet cable, connect the ISP to the WAN port of the device.

• As a result, the setup is complete.

Tenda AC1200 Router Setup Through DHCP:

This method's steps are as follows:

• Go to the wifi settings page.

• Select DHCP from the drop-down menu.

• Select a password and save it for future use.

Tenda now supports DHCP. The crucial thing to understand is that the DHCP is managed by the ISP.

Static IP Setup:

The following is a step-by-step tutorial on setting up a Tenda AC1200 router with a static IP address.

• To begin, open a web browser and type 192.168.0.1 into the address box. However, soon this will take you to the router's login page.

• Fill in the credentials, then in the password area, type "admin," which is Tenda's default password.

• Go to the -internet connection setup section. Select the sort of internet connection you want. Select a static IP address.

• It's time to fill in the blanks, such as "DNS server, IP address, default gateway, subnet mask, and alternate DNS." Click the "OK" button.

• After all of this, The condition of your internet connection will be connected.

You can access the internet through the Tenda network.

Setup Router with PPPoE Mode:

The instructions for setting up the Tenda AC1200 router over PPPoE are as follows:

• Open your browser and type 192.168.0.1 into the address bar. Put your credentials in the credentials box and type admin in the password box. The default password is admin.

• Locate the internet configuration screen and select the PPPoE option from there. Fill in the ISP's login information as well as the security key. Then press the OK button.

• Start your router again.

You can now use your internet connection. One must read this blog if you want to find out how to proceed with the Tenda AC1200 setup router. You should instantly go through the steps that are given above, as you would be able to find the answer to the significant questions like, how many methods to set up Tenda router?