Hikvision CCTV Camera Installation: Avail Step By Step Guidanceby Damati Infotech Damatiinfotech
Hikvision CCTV camera is popular for its excellent on-screen display and outstanding motion detection technique. It's an in-built powerful HD-RVI and HD-CVI, as well as AHD technology, which makes it the best amongst others.
Hikvision installation process is not only limited to purchase the camera set and connect to the cables. It’s installation steps are very tricky to be done else it can cause security issues as well. Hence, you have to be very careful while performing the installation process or hire the best professional for Hikvision CCTV camera installation.
Essential Steps to Install the Closed Circuit Camera at Your Surroundings:
There are certain steps that you need to follow in order to complete the Hikvision camera installation program. So, take a look at them and perform sequentially to overcome the CCTV setup error.
Step 1: Look for a Proper place for Camera Installation
The first step is to figure out a suitable space where you want to mount the Hikvision cameras. The CCTV Installation should be arranged in a proper way and it should have the power to cover a maximum area with ease.
The best thing is to hang the cameras on the sidewall of the entrance and then it helps to monitor the outside easily. Avoid the wall or any corner in front of a pillar or near any other object for monitoring the inside of the room.
Step 2: Focus on the Camera Installation Process
This step is the most important step as an accurate measurement is required before making a hole for locating the CCTV. Create a hole in the wall in such a way that the cables and wires of the cameras can be fed through that hole effortlessly.
Drill the holes according to the sizes of cameras (each hole for each camera) and use the fish tape to attach the end part of the Hikvision cameras. Ensure that all four cameras can access the cables properly.
Then, connect the camera wires to the DVR box very tightly. A loose connection makes a technical problem at the time of running the cameras.
Step 3: Setup DVR
Hard Drive Installation: The hard disk drive installation is important before installing the DVR. So, open the recorder and install the HDD, then connect the power cables to complete the process.
Setup the Hikvision DVR connections: First, install all the analog cameras under technical help. Then, use good coaxial cables and connect the DVR to a monitor via the HDMI interface or VGA output cable. The other part of the DVR cable is attached to a power resource.
Plug-in the Hikvision mouse to a smooth USB interface. Then, make sure that both the USB backup and network are working simultaneously without rising any technical issues.
Step 4: Attach all the Hikvision Cameras to DVR
Connect all the Hikvision cameras to the DVR through the BNC connector and with the help of coaxial cables. Then, you can use the RCA connector instead of BNC but the BNC is more powerful and finally, check whether the data storage device is working or not. Now, set the brightness, saturation, contrast sharpness of the display as per your convenience.
Final Step: Test the Camera Performance
After setting up the cctv installation, DVR and storage unit, the final task is to verify whether the Hikvision camera is functioning properly or not. Wait for at least 24-28 hours and test its working conditions. Rectify the exact issues if any problem occurs with the reliable help of a professional CCTV designer.
Created on Sep 9th 2019 02:24. Viewed 469 times.