Heavy Copper PCB Comes With Higher Mechanical Strength and Thermal Endurance!

It’s the increasing demand for high frequency PCB that has really pushed the PCB makers to their limits. Now they are looking for new designs of PCBs which can perform under extreme conditions. It’s the electronic market where these PCBs are in great demand. This might be a reason why the Huasun Corp has come up with the heavy copper PCB that is considered as the high frequency PCB in the recent time. These PCBs are really the performance oriented ones. The best quality of materials is used to make these PCBs. And to make them very robust and performance oriented, they are designed while taking help of the latest equipments and methods. The technology used to design these PCBs is the latest one. Due to this reason, the margin for error has been eliminated to a huge extent.

If you are into the making of electronic device for which you need the high frequency PCB, then the heavy copper PCB is what you need now. It’s the PCB industry for which the heavy copper PCB is considered as the latest addition. Such PCBs can be used for a wide range of electronic devices, as they can bring great benefits to the table. However, the cost of these PCBs can also remain high, as the production cost also remains very up. Despite such cost factor, these PCBs are in demand and doing just great wherever they are used.

When you are looking for the high frequency PCB, the heavy copper version may appear as the first choice. However, there is hardly any definition provided for the heavy copper PCB. Still, this term can be used for those PCBs for which three ounces copper is used to make both the external and internal layer. This type of term can also be used for those circuit boards for which copper thickness remain around 4 OZ per Ft2. Well, the term like heavy copper PCB can be best used for those printed circuit boards for which 20 OZ per Ft2 copper is used.

As far as the heavy copper PCB is concerned, this one is considered as the provider of reliable and efficient wiring platform. This occurs due to some reasons like thicker plating, addition of proper substrate with copper and the through-hole circuit design. In order to manufacturer these printed circuit boards a wide range of plating and etching techniques are followed. However, the prime objective always revolved around the fact like adding the copper thickness with the help of side walls and plated holes.

There are some major benefits of using the heavy copper PCBs.

• It comes with higher thermal endurance
• It promotes a superb current-carrying ability
• At the connectors sites and PTH holes, it carries higher mechanical strength
• As several copper weight are combined for just one PCB, the circuit size is also reduced to a great extent
• In order to enhance the mechanical characteristics, exotic materials are only used
• Complex end to end wiring like problem has been eliminated successfully

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jan 22nd 2019 23:31. Viewed 353 times.

Share on APSense

Comments