GEN5 Print Head VS EpsonXP600 Print Head, Which One is Better?
GEN5 printheads are mostly popular recently, and
it is especially common seen in a Uv flatbed printer. GEN5Print Head VS Epson XP600 Print Head, Which One is Better?
The XP600 print heads
Advantages Of Epson XP600:
1. Print effect ranked first.
2. The price is relatively cheap.
3. The nozzle can print 5mm radian products.
4. Suitable equipment type is broad, the
consumable material such as the sublimationink is easy to buy, the maintenance cost is low.
Disadvantages Of Epson XP600:
1. The EPSON XP600 print head uses ABS
material, the nozzle's anti-corrosion and fluency is not so good.
2. The XP600 print head can only print 20,000
square meters, the can be only used for 6-10 months, spray white ink will be
easier to plug the head.
3. The printing speed of the nozzle is reduced
and the encryption channel appears.
GEN5 print heads
1, Ricoh G5 Nozzle is a real
industrial-grade nozzle, it was invented based on the technology of Ricoh G4
nozzle by the Japanese Ricoh Company. It uses closed stainless steel floor, so
that the nozzle with anti-collision, scratch-resistant function, no longer
worry about the nozzle was smashed, or scraped. Ricoh 5 is not easy to be
bothered by the work environment (there is constant temperature and circuit
insulation system). Not affected by the ink temperature viscosity (applicable
to a variety of inks, printing image clear. Out of ink flow).
2. Ricoh G5 nozzle has a faster speed and higher precision. Now the
standard of Ricoh Nozzle is 7PL, it means Gen5 print head has a large
improvement in efficiency.
1. The price is too high
2. The print heads are is bundled with the
ribbon wire. If there is a problem with the wire, the nozzle will be scrapped.
3. Technology is not Good enough. Ricoh
Equipment was first used in 2014
4. The price of equipment is very high
5. Can only print products which not exceed
3mm, UV printing with white ink is not easy. The technology is difficult to
control when printing on super large format products.
there are also many countries UV flatbed printer uses Epson Xp600 head or even
dx10 head. But the technology is not yet mature, so Epson xp600 quality is
better. So GEN5 Print Head
VS Epson XP600 Print Head, Which One is Better?
Finally, no matter which print head you choose, remember to
take good care of it correctly. As the most important part of inkjet printer, if you can’t do
the daily maintenance well, it will affect your normal work.
Now based on the whole comparison, GEN5Print Head VS Epson XP600 Print Head,Which One is Better?
Created on Aug 20th 2018 02:32. Viewed 138 times.