Fix the Problem of Dreamup for your Dm500 hd

In this blog I would like to talk about one common problem that some people facing in dm500 HD. One of the problem is dreamup not connect to dreambox and other is problem in flash browser. Generally most of the people avoid using dreamup unless forced to. So I think one should try flashing designed by the Dreambox web flash interface, so covered in the wiki. And always note that If you're using a clone, newer versions of DreamUp (>1.3.3.4) will not work... and don't flash a non-clone image to a clone. And here is the Easy way to flash a DM 500 HD.

·         Shutdown your box, flip the switch on the back.

·         Switch on your TV.

·         Push and hold the powerbutton on the front and switch on your box.

·         Now, after a few seconds, dos like screen will appear with all the network settings.

·         Flash your box using the web interface.

·         Make sure you first flash the experimental image from DMM first to update your boot loader.

·         Then flash the OpenPLi image and you're in business.

If you still facing a problem than you must contact your seller and always remember that with any gadgets do not open until you not sure about the problem and not sure how to fix it because of that you will not have the advantage of the warranty and also it can be create more problem for you so before you do anything with it just make a one call to your seller.