FgTech galletto v54, kess v2 and KTAG review
Customer review:
- review on KESS V2 and Ktag
for US$159.00
Why do
I buy KESS V2 and Ktag programmer together?
“KESS V2 is a ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10).
With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag you need to take apart the ECU and open it, after you can make the read/write operation.
Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed.”
- review on Galletto V54 and Kess V2 for US$183
“Galletto 4 work with truck, including Benz truck, read and write ECU via both BDM and OBD; KESS not works with truck, read and write ECU via only OBD, not BDM.
i have buy the fgtech v54 and for now i
must say, iam not disapointed with it.
have try for now only
BMW E39 530D 1999 edc15 - R/W OK BY OBD
VW TOURAN 2.0TDI BKD EDC16 2007- R/W OK BY OBD
AUDI A4 2.0TDI 143HP EDC17CP14 2009-READ OK BY OBD Write not try yet
GOLF 6 2.0TDI 110HP EDC17CP14 2009-READ OK BY OBD write not try yet
opel meriva 1400 16v ,Z14XEP 66KW PETROL 2005 BOSCH ME7.6.2 Not read BY OBD
ALFA 159JTDM 16V EDC16C39 2006 READ OK by OBD 40 min Write not try yet
all without some problem in read or write”
Post Your Ad Here
Comments