Fed Up Of False Alarms:- Top 5 Reasons & Ways To Preventing Them!

by Eva Spenser Innovation

A false alarm can prove expensive. Not only can it lead to wasted resources but also increase the adjusted cost for each burglary. However, these costs can decrease significantly if one spots its common causes and possibly learns to prevent it.

“In 2015, The Fire And Rescue Department of NSW received 48,000 automatic fire alarm triggers. But 97% of them are found to be false, thus resulting in enormous time and resource wastage.”

5 Reasons For False Alarm Triggers:-

False alarm triggers result due to several reasons. But surprisingly, most of them result from human mistakes.

Unauthorised And Untrained Users:-

Unauthorised and untrained users like cleaning crew, house sitters, crews repairmen, babysitters, etc. often trigger off false alarms by accident. And one common reason is not being aware of the sensor locations or entering the wrong passcodes. Letting too much time pass before entering the correct code can also lead to false alarm triggers.

Faulty Alarm System:-

If your alarm system is not functioning as well as it should, then there is a good chance that it could trigger off a false alarm anytime. This is more common in old types of security alarm technology like outdated sensors, ionization sensors on smoke alarms, etc.

If you do get a lot of false alarm triggers from your existing system, then contact a reliable company specialising in security alarms in Shellharbour to replace them immediately.

Not Securing The Doors & Windows Adequately:-

Not closing the doors and windows properly prior to setting the alarm system can prompt the system to trigger. The same can happen if there are loose window and doors.

In fact, any outside element that gets in through those cracks on the door or windows such as rain, wind can trigger off the alarm system.

Objects That Move Near The Sensors Or Improper System Upkeep:-

Objects such as balloons, plants, or any other which move near the motion sensors will trigger a false alarm.

Additionally, like any given appliance or system present in your house; your home alarm security system will require proper care from time to time. Or else, it increases the possibility of malfunctioning or triggering off false alarms.

So, if you come across dirty sensors, clean them and if you discover old/deadbeat batteries, replace them immediately to avoid false alarm triggers.

And, Wandering Pets:

If you have pets wander your house even when you are not present, they get detected by motion sensors whenever they wander close to it. And this sets off an alarm trigger automatically.

Prevention Tips:-

Speak to your provider of security alarms in Wollongong (or from your local area) about specialised pet sensors that exclude your pets from triggering off false alarms. It is a standard feature in most modern-day alarm systems, and they are straightforward to access too!

Replace the batteries as per the indicator. Also, look to dust all sensors, motion detectors and cameras.

Check if the alarm system is not installed properly, or if the sensors or detectors are misaligned.

Ensure the motion sensors are not placed to close to the air vents.
Lastly, pay close attention to the weather and ensure the security system is adjusted when a storm is on the way.

Final Say:-

You’ve already made the move by fitting a home security alarm system to keep your home safe. But with that; you should also ensure they work appropriately with less false alarm triggers.

If you need your system checked for minimal false alarm triggers, contact notable companies offering quality alarm systems in Shellharbour at budget-friendly rates.