Equipment Which Requires For The Vinyl Floor Installation?

Vinyl Wood Flooring is attaining tremendous popularity across Singapore for its numerous benefits - one of which is its easy installation. Getting Vinyl Plank wood flooring is as easy that you can do it yourself efficiently and can save the cost of installation.

Either you are planning to install Vinyl plank wood flooring by yourself in your house, or are acquiring the services; you need to consult a qualified interior designer in Singapore who will give you a better idea of installation.

The interior designer will not only guide you about the proper design of the Vinyl Plank Wood floor but will also give you an estimation of overall cost it may take. Before starting the installation, you should analyze the quantity of Vinyl Wood you need for your house.

Here is the list of equipment that you will require for the installation:

Chalk Line

Vinyl Tiles Planks

Vinyl Floor Cutter

Adhesive (tabs, spray or full spread adhesives)

Heavy Floor Roller

Floor Preparation

Before installing any kind of vinyl wood flooring, you need to prepare the surface of the floor by leveling it. Most of the time, this kind of flooring is installed over the wood sub-floors or on the concrete sub floors which are first leveled if damaged from anywhere. For a smoother installation, you should remove all the gravels from the surface of the subfloor. Although, vinyl plank wood flooring is simple every brand has its own instructions and specifications labeled on it. You need to read them carefully to get desired results.

Installation

You can find Vinyl Flooring Singapore or Vinyl Plank Wood in two types -- the one with self-adhesive beneath it and the other without it. If you are using the one without any adhesive, you can consult any interior designer in Lahore or in other developed cities of Singapore, who will suggest you the best adhesive material.

Draw a Line

First draw a line with Chalk to make a layout, so that putting in tiles in a specific order could become easier.

Tiles Placement

You can keep a design in front of you so that you could continue placing tiles in the right order. Keep checking the order after completing each row for a perfect tile placement. At some stage, you may need to cut the tiles to resize or reshape them; therefore, always keep a vinyl cutter near you for a quicker and accurate cutting.

Level the Tiles

Once you are done with a tile placement procedure in the specific area of your house, like a bedroom, living room or a kitchen, you can roll over a heavy floor roller on the newly placed tiles to make the look of your floor more even and smoother. The purpose of using a heavy floor roller is to give a finishing touch to your vinyl wood flooring.

Thus, the easy installation procedure of Vinyl wood flooring will help you save the huge labor cost. Although, the cost of buying equipment may make it an expensive option you do not necessarily need to buy the tools; rather you can take the heavy equipment on rent from any nearby tools store or home improvement stores. The charges of hiring tools are highly economical; all you need to do is to use them safely.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Aug 31st 2017 05:20. Viewed 547 times.

Share on APSense

Comments