Easy Steps To Fix Epson Printer Error Code 0x10

by Christiana Parker AOL Desktop Gold Support and Get In
While working with their new Epson printer, several users reported on Epson Printer Error Code 0x10. But, while working with their ancient Epson printer, some customers also receive this error code. For several reasons, this error code may happen. Usually, Epson scanner error 0x10 shows that the printer scanner is defective. This problem can be caused in the event of an ancient printer energy surges or periodic wear and tear. You must therefore be conscious of the origin of this mistake so you can attempt to solve it.

Causes Of Epson Error Code 0x10
We are jotting down all the possible reasons behind this error code. Have a quick glance:

  • Inside the printer, some particles can get stuck and cause this error. As a result, the scanning mechanism is obstructed.
  • This error code can also be caused by jamming the scan head assembly or failure of the logic board.
  • In most cases, the actual cause of Epson error code 0x10 may be an internal or hardware error.
  • Because of a faulty scanner, the scanning may fail and as a consequence, this error code will crop up.

Some other causes of this problem are incompatible or damaged printer drivers.
Since you have an idea behind the possible causes of this mistake, with the corresponding alternatives, we can move forward.

Methods To Fix  Epson Error Code 0x10
Check the methods mentioned below and try them out to fix this issue.

First of all, perform a physical printer inspection, lift the scanner cover and search for some paper, dirt or other objects. If you discover any undesirable particles, then thoroughly pick them up. Otherwise, it can have fatal effects on the scanner of your printer. Then restart the printer and you have to reset the printer if you continue to receive this error code.

Reset the printer
Disconnect from the energy source the Epson printer and wait a few minutes. Press and hold the printer's energy button for at least one minute. After that the printer is reconnected to the energy source. Then restart the printer and scan a paper. If the scanning fails, it appears that Epson scanner error code 0x10 has not been fixed.

Change the Printer driver
If this error is occurring due to an incompatible or faulty printer driver, then change the driver.

Turn both the desktop and the printer on at first to substitute the driver. Set up your desktop to download the driver software automatically. Search for setup settings for your Windows and then select ' Change setup settings for your computer.’

Click the ‘Yes’ button and save the changes.
Connect your printer to your laptop and allow a compatible driver to be searched by Windows. If Windows finds such a driver, it will download and install it on your PC automatically.

Internal or hardware fault
Various instruments for fixing inner or hardware problems are accessible on the internet. You can download them to solve Epson error code 0x10 and simply use them. But if you're not assured of the reliability of these instruments, our Epson tech specialists can help you.

If still Facing? While working with new Epson printer, several users recorded Epson Printer Error Code 0x10 on Epson. Dial +1-866-231-0111 Get expert solution on Toll Free Number.

About Christiana Parker Junior   AOL Desktop Gold Support and Get In

0 connections, 0 recommendations, 12 honor points.
Joined APSense since, July 11th, 2019, From New York, United States.

Created on Jul 17th 2019 02:39. Viewed 139 times.


No comment, be the first to comment.
Please sign in before you comment.