Connect ELM327 scanner to iPhone via WiFi
by Nada S. Launch X431 x431shopI saw some forum members asked about how to use ELM327 WiFi connection on iPad, iPhone or iPod the other day so I would like to make a quick guide about this. ELM327 IOS can be ordered on Careucar under $25 with free freight.
1. Plug the ELM327 to the OBDII port in your car.
2. Start your IOS device, chose to connect to a Wi-Fi network in the
Settings. It should be relatively easy to find out which one it is.
3. Once connected to that Wi-Fi network, click the small blue arrow to
go to the advanced settings for it. Set the IP Address to Static.
Configure the IP address to 192.168.0.123 and the Subnet Mask to
255.255.255.0. Then, go back and exit the settings. Other guides/videos
might tell you to configure an IP as a “router”. That is not only
useless but annoying as it would mean your iPhone would attempt to join
the Internet through your ELM327 and any data would not come through as
it’s connected to your car. Don’t set a router.
4. Start your car to provide power to the scanner.
5. Download a Dashcommand or any ELM327 diagnostic app.Start the app and make sure the connection is built.
http://www.careucar.com/
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.