Clean Your Computer's Hardware

Failure of computer hardware is always irritating. In most cases, these failures come as a consequence of neglecting the dust inside your machine. If you clean your computer's hardware regularly, you will ensure longer life for your machine. Every time you hear noises or humming and every time you spot large piles of dust on the external fan surface, you will have to clean the inside. This kind of tending will reduce the cases of overheating, failure of fans an other components, but it will also improve your machine's performance.

Tools for Cleaning

In order to clean your computer's hardware without risks for the fragile components, you must gather appropriate tools. Use an air compressor as your main tool along with screwdrivers for opening of the computer's case. You can prepare a small brush with soft bristles, rubbing alcohol and soft cloth. In addition, you must select a suitable workspace in order to avoid catching more dust. A comfortable table or desk in a room with good ventilation will do.

Necessary Precautions

Apparently, shutting down your machine is a must. If you have alternate power sources, shut them off, too. If you have a master power switch, flip it off for additional safety. Continue with disconnecting the peripheral cables and plug-ins – power cord, monitor cable, mouse and keyboard cables, USB etc. Now you are ready to clean your computer's hardware.

Cleaning the Inside

Open up your machine once you have chosen a good spot for the next actions. Use a screwdriver to remove the side panel or consult the manual if your machine has a different type of component removal. Get ready your air compressor and put on a dust mask. The latter is always a good idea, because sneezing can moisten the small electronic components inside the computer, which is disastrous. If you wear rubber gloves, you will decrease the chance of static shock. Use your air compressor by holding it upright. Otherwise, the compressor can leak, doing damage to the components of your computer. Work your way from top to bottom, so that the final layer of dust can be easily removed. Keep all components and cords untouched and make sure your air source blows from a medium distance. Concentrate on all fans and the heat sink fan over the processor. The latter looks like a collection of metal ridges.

Final Efforts

After cleaning the inside, use a cloth dampened with rubbing alcohol for the external parts. Make sure that the components are not moistened. After you're finished, use a small vacuum cleaner to clean the place around. Never use vacuum cleaner of any size for the inside of your computer.

Searching for a company like the cleaners in Hendon to do this job for you is a good idea. However, you must be sure about the skills of such cleaners. When you explore any website about cleaning, focus your attention on its list of services.