Checklist for Boiler installation

by Caitlyn Melocco Plumbing & Heating

Just about everyone living in the UK needs a boiler. This happens to be one of the most central and basic necessity of any living being. Whether it is a household or a commercial complex, everyone needs a boiler. However, choosing one for Boiler Installation Woking isn’t that easy a task. There are things to consider and a basic checklist that one needs to maintain before proceeding with Boiler Installation Woking.

The things to check

Here’s a simple list of things that you must make sure are all checked before you actually begin the process of boiler installation Guildford.

Information on the hot water storage panel

Every boiler is required to have a certain set of information printed on the boiler. Make sure that you check for the following:

1.      Complied with British Standards

2.      Vessel capacity in litres

3.      Boiler vessel type

4.      Performance of the heat exchanger

5.      Rate and d  egree of heat loss

What does the British Standard dictate?

The British standards for boilers are created to ensure that the boilers are absolutely safe for use while in any environment. The one that you are looking for comes under the BS 1566:2002; featuring a copper indirect cylinder permitted for household use or BS EN 12897 which is a condition for indirectly heated closed storage water heaters.

Efficiency of the Boiler

Boiler installation Guildford can be confusing and frustrating if you don’t know exactly what you are looking for. This is why it is important to ensure that you have a clear idea of every aspect that needs to be considered while buying and installing a new boiler.

Make sure you know the capacity that you are looking for and also ensure that the efficiency of the new boiler is at least 86%. It is always advisable to seek professional advice from a boiler installation agency or company for best results.

What does circulation with respect to boiler installation mean?

A boiler works in a way to carry out both heating of the room as well as heating water for usage. Having said this one must understand that it works with the basic principle of circulation to carry out this form of heating. Here in there are two most important things that you should check:

Pumped circulation

The circulation of the fundamental heating system should be pumped in either case of heating the rooms as well as the hot water system.

Boiler bypass

Some brands of the boilers require to have a boiler bypass installed within the system. If that is the case with your brand of the boiler, then ensure that a mechanical bypass valve has been provided.

Replacing a boiler

If you are considering a boiler replacement then there are a further few things that you must carefully look into. They are:

Efficiency

Every new boiler should be operating at a minimum efficiency of 86% however, while replacement make sure that your new boiler is not operating at a more than 2% worse efficiency than your previous or existing boiler.

CO2 emissions

If your new boiler operates with a different kind of fuel, you must consider the emission of CO2 before calculating the relative efficiency. The ratio: ’CO2 emission feature in present boiler / CO2 emission feature in new boiler’ must be acquired and then multiplied with the new boiler’s efficiency to get the accurate data about the value of the relative efficiency.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Dec 31st 1969 18:00. Viewed 0 times.

Comments