Articles
Built-in system of Diaphragm pump
by Cindy Liu marketing director
Diaphragm pump equipment system, is composed of one or more bilateral pump, such as a pneumatic double diaphragm pump.Divided the manifold on the pump, so that the each side of the pump out of an ingredient in multicomponent materials, a device is connected with the output of two side accumulation, phase-out of pump output in phase.Diaphragm isolation valves can be used on the each side of the pump outlet, so as to prevent the reverse flow of mixed material.If you need outside the mixing ratio of 1:1, can use more than one of this kind of pump are used together, so as to achieve a variety of mixing ratio.The diaphragm failure monitoring system, used to detect the diaphragm pump diaphragm leakage.The system includes pump, the pump has a studio, built-in working fluid;A pump chamber to into pumping material and send out of the pump;And a diaphragm to the studio from the pumping chamber.A first optical fiber connected to the studio to the optical signal transmission through the working liquid.A second optical fiber connected to the studio to receive the first optical signals from the optical fiber.To device an electrical signal, optical signal from the very first optical fiber, through the work not contaminated liquid when you arrive at the second optical fiber, set up the first electrical signals.The electrical signal processing, the light signal from the very first optical fiber, through the working liquid is polluted when you arrive at the second optical fiber, set up the second electrical signals.When the second electrical signals is established, on the basis of that pollution materials through the diaphragm leakage problems into the studio Which could be detected. Within the diaphragm pump diaphragm installation method, it is in does not affect the volume change of the pump requirements, and make full use of the diaphragm excellent compressive property, the geometric size of the diaphragm, it has no need to increase the cost and effort, and greatly improve the service life of the diaphragm, and to ensure that the normalization of production and improve the quality of products, it can be applied to a variety of diaphragm pump diaphragm installation.Because of pneumatic diaphragm pumps have the characteristics of the above diaphragm pump in the world since birth is gradually invaded other pump market, and has a part of it.Such as: painting, ceramics in the diaphragm pump has an absolute dominant position.
Sponsor Ads
About Cindy Liu 
marketing director
25 connections,
0 recommendations,
67 honor points.
Joined APSense since, May 3rd, 2014, From Beijing, China.
Created on Dec 31st 1969 18:00. Viewed 0 times.
Comments
Please sign in before you comment.
