Brother Printer Repair Manual [Installation + Setup]

Brother printers are a multi-purpose printing device that produces high impact files with clear, rich color and sharp images. Users often prefer this device due to its enhanced image quality.

Today, we are going to discuss the entire Brother printer repair manual along with the unboxing the printer, driver installation, and wireless setup. 

Brother Printer Setup: Step-By-Step Instruction

Here are the entire instructions of the Brother printer setup in a precise manner. So, you can check out these instructions and implement them in the same order as instructed to get a fruitful result.

Further, you can also opt to take help from a technician from Brother printer repair Dubai to get prompt assistance.

Step 1- Unbox the Brother Printer

As an initial step, you need to take out the printer device from the box by removing all the packing materials that are attached to the box. Now, place the printer on a flat surface and pull off the other related accessories from the box. Make sure you remove all the stickers and tapes from the printer related accessories.

Step 2- Establish the Connection

Now, it's time to establish the connection. Connect one of the power cables to the printer and another end to the power supply. Press the “Power” button to turn on the printer. 

Step 3- Set up the Printer Accessories

Open the front cover of the Brother printer and locate the cartridge access door. Now, insert the ink cartridges in its proper location. Further, open the paper tray and put a bundle of the paper inside the tray, Close the paper tray when you are done.

If you are not able to set up the printer accessories on your own, then contact Brother Printer Repair to get instant assistance.

Step 4- Download and Install the Necessary Driver

Before you proceed with the instructions, make sure that your printer device has been turned on. Follow the underlying instructions to download and install the necessary driver for your Brother printer.

• Go to the official website of the Brother and launch the download page.
• Here, you need to enter your printer name and model number.
• In the next window, a list will appear where all the necessary drivers and software are enlisted.
• Now, download the necessary driver software from the available list by tapping on the “Download Now” button.
• Once done, go to the download folder and invoke the installation by tapping on the “Start” button.
• Proceed with the remaining instructions to complete the installation process.

If you confront any kind of problem, while downloading or installing the Brother printer driver, then you can get in touch with Brother printer repair Dubai.

Step 5- Connect the Brother Printer to Wireless Network

Before you configure the wireless settings, you should have some knowledge about your wireless network. 

• Network name (SSID)
• Security key or password

You may find them at the back of the router.

Go to the Printer Control Panel and hit the Menu. Afterward, launch the Wireless setup or Network Settings. Use the arrow key to select the “Network” and hit the “OK” button.

In the next window, select the WLAN from the appeared menu and invoke the “Wireless Setup Wizard”. As soon as you perform this instruction, the printer will look for the available network. From the resultant list, choose the network that belongs to you.

Further, enter the SSID (Network Name) and Security key when you are prompted. Confirm the login credentials by tapping on the “OK” button.

Ending Notes: