Boat Moorage Annapolis – Trident Marine

by Jason Watts Content Writer

A boater should know about all the ways of stopping the boat in the water to navigate a boat with confidence. There are three primary choices to secure a boat in water: anchoring, docking, and mooring. There are certain subtle differences among all these three options. Mooring essentially means securing the boat to a fixed object like a mooring dock, buoy, pier, wharf, quay, or jetty. In a busy dock, a boat typically gets to occupy a dock space as per its width instead of its length. But there will always be direct access to the boat for unloading and boarding. If you are looking for a boat slip in Glen Burnie, MD, for mooring your boat, you can check out the Boat Moorage at the Trident Group Marina.

You may need to moor your boat under different circumstances in the water, like – when you are getting fuel filled up in the boat, while taking a break from sailing for swimming, preparing to halt in the sea overnight, or while storing the boat in the water when not in use. Not mooring the boat properly can be dangerous for the boat and the people on board. So, before you set sail, ensure that you have everything on the boat to moor your boat safely and securely.

Things You Need to Moor Your Boat Safely

It is essential to equip with everything for safe boat moorage. Here is a checklist that you can keep handy:

– An anchor with an anchor line attached.

– Stern line

– Bow line

– Spare line

– Spring line

– A couple of fenders

– Boat hook

There are a few techniques used for mooring boats. Some practice and trial and error are needed to perfect this technique. It can be especially a little intimidating when you have to moor the boat in a busy dock when many boats are around.

The Basics of Mooring

A boat hook or a line help to hook up the boat to a buoy. One way is to use the boat hook to attach to the buoy and pull the boat towards it, or one can also lasso the buoy with line and move towards it. A mooring chain, anchor, and buoy are available; the boat has to provide the line or hook to attach to the moorage space securely.

Here is what you should do to prepare the boat when approaching a mooring:

Are you aware of the rules and regulations of the mooring location? Are you allowed to moor in any location or at a designated space only? When you approach the mooring buoy, find your allocated space or any accessible mooring spot. Reduce the speed and bring the boat to a halt away from the mooring. Keeping in mind the wind and the weather, prepare for the approach. Get the lines and hook ready. Put the fenders and put on the side of the boat. Watch out for any traffic in the area as you approach the mooring spot.

Once you have moored, check out your lines and ensure they are secure. Close the hull valves, turn off any non-essential electric equipment, switch on the alarm, latch cabin doors and take your boat keys securely are you get off the boat.

If you are looking for moorage options in Glen Burnie, MD, for an overnight stay or a short/long halt, you will find the best quality, convenient and affordable moorage space at the Nabbs Creek Marina by Trident Marine. It is located just off the Patapsco River in Glen Burnie, and it boasts 110 floating dock slips. You can choose from options like wet and dry-stack and boatel. The marina is equipped with various amenities, like private restrooms with showers, a restaurant with a dockside bar, laundry facilities, ice delivery, and an on-site mechanic facility. Get in touch with the marina today for more information on moorage space.