BDM100 CMD v1255 clone ECU programmer indicator won't flash
by Alex Carter Mechanic AssistantBDM100 ECU chip tuning tool is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
BDM 100 requires the ECU to be open, "on the bench", as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).
BDM 100 also allows to create perfect copies of the whole software of an ECU (after having read the original ECU software).
Some BDM100 CMD clone users reported that when connect the main unit with computer using USB cable, the green indicator did not flash(picture display) They assumed that the device BDM100 programmer is damaged.
Reason:
The BDM100 green indicator light only flashes when you start to read/write ECU with the tuning kit.
1) Connect the BDM100 with computer
2) Well install BDM100 V1255 software
3) Connect the BDM100 programmer with vehicle via OBD socket
4) Read/write ECU, check the green indicator light if it is on
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.
Comments
No comment, be the first to comment.