Advantages of Choosing Stick Welders amongst other Welding Machines

Selecting the right welding process for you can be confusing. When choosing a welding process, the idea is to produce a high quality weld within the shortest amount of time. For instance, if you decide to go with ahp welders, you’ll want to ensure that it will produce a quality weld based on your needs.

 Success will be achieved if you are able to create a weld that doesn’t have gaps or pores and also has a good surface finish. The environment where the welding is done should also be considered when choosing the right machine. We will briefly discuss the stick welding process and why it is still used regardless of the increasing number of welding machines introduced in the market. 

The traditional stick welders need no introduction. It’ commonly used because it requires minimal equipment. You just need a power source, an electrode holder and work clamp to begin the welding process. We will look at some reasons why many contractors prefer stick welding. 

The stick welding process is often preferred when the repair and maintenance work, involves dealing with rusty or maintained metal surfaces. Welding machines like MIG can only be used when the metal surface is clean. If the metal at the weld point is corroded or has traces of paint, then MIG welders will not be effective. 

You’ll realize that the stick welding process can be used in outdoor maintenance work compared to other welding techniques like MIG. This is because welders of this nature are not affected by strong winds. MIG on the other hand can be affected by even the slightest breeze. The shield of inactive gas when disrupted by wind, can affect the weld and lead to massive faults, which is why MIG welders are not recommended outdoors.

Stick welding process doesn’t have too many stringent conditions and for this reason, most materials can be stick welded. It can even be used to weld dusty or rusty materials so long as you know how to use the machine.

Low initial cost

Stick welding is somewhat cheaper compared to other welding techniques. It is generally cheaper to get started with this process.

Can be performed in hard to reach areas

Stick welding is usually recommended because it can be done in any position. It’s easy to weld the hard to reach places using this type of welder compared to the MIG welder. Even though stick welding technique cannot be used to weld thin materials, it is still a preferred technique used for most materials.

Choosing the best stick welder

Now that you know the advantages of the stick welding process, the next important step would be to choose the right machine for your needs. If you are going for the stick welder, ensure that you choose the right power supply for it to function best. The AC/DC power supply is usually recommended for this type of welding process.