Abrasives diamond cutting tool types

1. Diamond saw blades: This is the only way round diamond cutting disc manufacturing, but also for thin cylindrical blade, wire saw beads, wire saw or the like. Electroplating diamond saw blade is characterized by a binding agent is holding very strong, a diamond blade is good, and you can adjust the height of the blade, thus cutting sharp, good durability, low cost, adaptable. However, a relatively long period, lack of environmental protection.

2. Rolling blade: diamond saw blade located in the outer gap, the substrate is a relatively soft steel, diameter of 100 ~ 200mm, thickness of the paper is 0.20 ~ 0.40mm, typically for a timepiece cut gemstone group.

3. diamond tipped saw blades: This multi-blade bronze as binding agents, cold sintering process. Diamond tooth-shaped elongated bar form or I can direct compression, or be pressed into the tooth and then inserts the tape base circle surrounding alveolar vitro. This blade is mainly used for glass, crystal and other sections, but also for marble, terrazzo and other trimming.

4. inlay welded diamond saw blades: This is currently the most widely used method for producing O blade, but also most of the stone processing blade form. Stone processing methods such as a circular saw, gang saw, are first formed into a zigzag section block (head), and then welding the nodal welded to the steel substrate.

This manufacturing method is applied to high-volume, semi-automated production. By adjusting serrated binding formulations to obtain a variety of hardness and mechanical properties of the head, to accommodate a variety of different processing cutting objects.

5. extrusion diamond saw blade: This blade is cylindrical cutting blade, a bit like rolling blade, diamond is also located in the periphery of the base body cracks, but diamond thick, Chifeng much longer . Saw blade diameter 500mm diameter can be achieved even greater. This blade used for jade, precious stones, shells and other crafts cutting.

6. The sintered diamond saw blade: This blade diameter 400mm specifications, mainly in the following, the manufacture of the first cold press molding using a mold, then placed in a special sintering equipment. This class saw blade for cutting granite, concrete, asphalt, marble.

More product information pls visit:www.3betterdiamond.com