A complete guide to lawn edging- required tools & process

A crisp edging not only gives your garden design on a different level but also makes your garden maintenance easy. Unorganised and messy edges are hard to maintain, resulting intruding grasses into the flower beds.

You can find a landscaper specialist in the business directory of UK for a professional lawn edging. However, if you want to know the nitty-gritty of lawn edging, keep on reading.

Required tools for lawn edging

Before starting with lawn edging, one must lay down the appropriate tools. Here is the list of tools that are required for lawn edging.

• Metal or plastic edging strip

• Trowel or spade

• Hammer

• Rubber mallet

• screwdriver

Step-by-step process of lawn edging

Once you gather all the requisite tools for lawn edging, you can start the process. However, it is best to find an expert from the landscape directory to get your lawn edging.

Step 1: Planning

Before you start, you must have a neat shape defining the flower bed. You can take inspiration from trending landscape design in London to plan the shape. Therefore, take a sharp spade to create the lines to separate the flower beds from the lawn. In addition, it will allow you to measure the lines and decide the length of edging that you must buy.

Step 2: Dig a trough

Now you must dig a trench on the ground for edging along the entire line around the flower bed. You can do this with a regular spade or trowel if the soil is moist and loose. However, you must need a sharp spade to cut the dry soil, ensuring the dirt crumbles away from the turf. Keep in mind that you may dig a little deeper for plastic edging strip.

Step 3: Place the edging

Now, measure the edging and lay them on the line. If your metal or plastic edging is longer than the line, use a sawlike knife to cut the strip in the perfect size. However, if you are connecting multiple strips, make sure to distribute the connector evenly between both the pieces. For plastic strips, you must backfill or push the soil against the strip to make sure those are stable.

Step 4: Tap the edging with a mallet

Starting from one end, tap down the edging with a mallet. However, you must make sure that the edge is completely vertical while you drive it into the ground. Thus, you can secure your edging from bending which helps you connect the next edging strip accurately. This taks becomes a bit tricky which can be done professionally by a landscaper specialist found from the business directory of UK.

Step 5: Connect the next edging strip

Keep one end of your edging strip out to connet the next strip. Generally, the metal edges come with connectors that slightly overlap o one side. These help connect the edging strip with one another. However, you may need to use a mallet to tighten and secure the connector. In case of plastic edging, you may need pins, clips or tent pegs to join them together.

Step 6: Give it a mower test

You must ensure the mower blade does not touch the top of the edging. Ususallly, the lowest level of a mower passes over the edging if it is 1 to 3 mm above the soil surface. To ensure that, make sure to give the edging a mower test.

Wrapping it up

Lawn edging not only enhance the beauty of your garden but also reduce your effort in maintaining it. However, when it comes to get it done, a landscaper specialist from the business directory of UK can be the ideal option.

These are the required tools and step by step process for lawn edging that you can try yourself. Or you can hire an expert for more efficient and effective edging in your garden.

Meta title:

How to install lawn edging step by step?

Meta des:

Organising your garden with lawn edging gets easier with a landscaper specialist from the business directory of UK. Check out these steps to install them in your garden.