Linksys RE6400 Setup Guidance With Troubleshooting Guide
Linksys re6400 is a dual band wifi range extender. It effectively eradicates all dead zones and connectivity problems. To be specific with Linksys re6400 setup, you can easily cover an area of upto 7500 square feet. With integrated beamforming technology, the extender is worth every penny. Because no matter where you move around your abode with your device, the extender will direct its signals to your device. Moving further, with the cross-band technology, the extender makes the best possible use of both the frequency bands that are 2.4Ghz band and 5Ghz band. Moreover the extender features an ethernet port, with the help of which users get to connect any of their wired devices like gaming console, smart TV etc.
Not only this but you also get to perform Linksys re6400 setup very easily with the help of WPS button. Additionally, the spot finder technology adds a cherry on top. Because finding the right placement spot for the extender is no less than a task. For more details keep reading.
Installation Needs For Linksys RE6400
To setup Linksys re6400 using internet browser, the requirements are:
A router with an active internet plan.
Thereafter, you need a wifi enabled smart device.
An Ethernet cable (optional).
A vacant power outlet.
Username and security key of your existing wifi network.
Default network details of Linksys re6400. It is written on the back panel of the extender, so note it down from there.
Lastly, keep the user manual by your side as it contains crucial information like default IP address.
Quick Installation Steps
The Linksys re6400 setup takes a few minutes. As it is extremely simple and quite straightforward.
✓ Power On
First plug in your re6400 into a vacant power outlet which is nearby to the host router. As you turn it on, the smart LED light indicator will blink green. It depicts that the extender is booting up. As the booting process completes the light will turn solid green. It means you can now move further with the Linksys re6400 setup.
✓ Connect Via Smart Device
Moving forward, take any smart device. Make sure it is working properly and is up-to-date. Now you need to connect this device of yours to the Linksys extender. For this use the default details as you jotted down from the extender's back panel. For a quicker yet reliable connection you can also use an ethernet cable.
✓ Activate A Web Browser
After building a solid connection between your smart device and the extender, you now need to launch a web browser for Linksys re6400 setup. You can use any browser like internet explorer, chrome, firefox, edge or any other of your choice. Just the point to remember here is that the chosen browser should be of the latest version. Now move towards the address field of the browser. In it very precisely without any typos enter http://192.168.1.1 and push enter key. Just in case the IP address doesn't load the Linksys re6400 setup page, then as an alternative you can enter a web address that is http://extender.linksys.com.
✓ Adhere To The On-Screen Prompts
You now have access to the setup window. First tap on the Start New Setup option and then agree to terms and conditions. As you do so, you'll get the prompts on your screen that will lead you to the completion of Linksys re6400 setup.
Troubleshooting Guidance
Aren't able to get your Linksys re6400 range extender connected? No issues follow these simple troubleshooting points:
✓ First, make sure during the first time setup or initial setup, you need to place the re6400 range extender nearby to the host router. After the setup completes, you can relocate it with the help of spot finder technology.
✓ Next, avoid the placement of range extenders near the metal objects, heavy furniture set, thick concrete walls as well as nearby to the reflective surfaces like glass and mirrors.
✓ Moreover you should avoid placing and conducting Linksys re6400 setup nearby to the electrical objects. Common interfering objects are refrigerators, microwave, oven, cordless phones, bluetooth devices, baby monitors, fish tanks as well as security cameras.
✓ If you aren't able to get connected to the extender, then also recheck if the power supply is proper and constant or not. Additionally, look for the pending firmware updates.
✓ Moving further, the ideal location for the placement of Linksys re6400 is halfway from the router and the area where you are facing the dead zone issue. But make sure the extender is within the range of the host router. Move it where the signals are at least 50 percent from the router.
✓ Sometimes even a simple restart can fix the connection issues. So try restarting your range extender, host device as well as the router. To do so, simply pull out the power of each device. Let it sit vacant for at least a minute. Now replug. Do not jump on directly to the next step, because booting up takes time. Wait for the devices to stabilize after a restart.
