How to Ensure that Your Vehicle Clears the MOT Test?

For a vehicle to drive efficiently on roads, it must be roadworthy enough. To determine the roadworthiness and safety of the car, it has to adhere to some legal requirement, which is clearing the MOT Test Oxford. Ministry of Transport test or MOT test is an annual test that a vehicle has to undergo if it’s more than three years old.

 

Preparing for MOT Test

To make sure that your vehicle passes the MOT test, you have to prepare it for the same. For that, you have to run a pre-MOT check on your vehicle to make sure that all of its parts are working effectively to clear this annual vehicle examination.

So to make sure that your car passes the MOT test, you must take care of the following points.

Checking Wheels  

Wheels and tyres are undoubtedly the first things to check before you take the vehicle for a MOT test. For the wheel check, all wheels must be in complete alignment and are properly attached to the vehicle. All of the components of the wheels like the bolts, centre disc, and valve stem, should not be missing and should be in perfect condition. There should be no damage or cracks on any of the parts of the wheels, as the wheels are properly evaluated during the MOT test.

Tyre Check

Just like wheels, tyres are amongst the most crucial parts of the car and are responsible for efficient and safe driving. Tyres have to be properly inflated as both under-inflation or over-inflation of air pressure in the tyres is not all a favourable condition, and can get your vehicle disqualified. Also, there should be no cracks or damage to the tyres, if there is, have the tyres repaired. If there are too many cracks or the tyres have degraded, then it is best to replace those tyres before you take your vehicle to the MOT testing.

Besides that, tread depth is also something that has to be corrected as the tread depth below the legally specified limit is not safe to drive with, and will surely make the tyres unworthy to be on roads. The usual recommended tread depth for a tyre is 1.6mm, anything below that makes the tyre not eligible to pass the MOT Test Oxford. You may have to get the tyre rubber changed or replace the tyre altogether to make sure that your vehicle passes the MOT test. Also, there should be no cuts, cracks, and bulges on the tyre. Tyres of all four wheels fixated on every axle, should be of the same size and correct tyre pressure.

Assess Brakes

Car brakes are also a crucial part of MOT assessment, and they have to be in perfect working condition. Efficiently working brakes are a critical requirement for vehicle safety, as driving with dysfunctional brakes will make it extremely unsafe for both you and all other people on the road. Brakes are a great measure of safety, in addition to the requirement for clearing the MOT test. There is a test called the roller brake test that a vehicle has to go through to check the brakes. Brakes should be properly balanced, and decelerate efficiently. The brakes should stop in a straight line and not here and there. They should be able to have a balanced and firm grip on the vehicle, even on rough and steep surfaces. Also, all the internal elements of the brakes are evaluated in the MOT test to make sure there is no fault in the brakes.

Emissions and Exhaust

Emissions systems are also checked thoroughly in the MOT assessment. For that, a unique tool is attached to the exhaust for testing the emissions. There is a legal limit for emissions which depends on the age of the car or other aspects, the limit for emissions depends on and varies according to the vehicle model. If there are visible smoke tailpipe emissions and loud noises, then the car will not pass the MOT Test Oxford. The exhaust system should be fixated securely and safely to the vehicle so as to avoid gas leaks. Therefore, check the emission system before you are headed to the MOT test. You can get the emissions checked and fixed by a mechanic to ensure that they all function properly.

• Besides the above, vehicle doors and all the related parts should also be checked if they are working properly.
• Car horns should also work efficiently and loudly, and be audible to the vehicle’s around.
• All lights including indicators, sidelights, brake lights, and headlights along with their alignment, should be working properly.
• The bodywork of the vehicle should be checked for any damage or erosion. Especially if the vehicle is old, rusting of components is an issue that is likely to come up in the MOT test.

 

Conclusion

You can get your vehicle checked at My Oxford Tyres before the MOT test because if your car is not able to pass the MOT test, it will not be eligible to drive on the roads of the UK. Therefore, your car must clear the MOT test with flying colours. Clearing the MOT test means that your vehicle is not only safe enough to be on the roads but is legally compliant.