Strange Evolution 2 Ball Bearing DDM Front Brake Kit
'79-'87 Malibu, '78-'88 Cutlass, ... 4 3/4" B.C.
Evolution S Rotors, 2 Piston EVO 2 Calipers & DTC-30 Pads

$1,395.00

Part Number: B4722WCE

Designed Specifically For Drag Racing

Evolution Front Brake Kit

1979-1987 Regal
1982-2002 S10 / S15 (2 wheel drive)
1979-1987 Malibu / El Camino
1979-1988 Monte Carlo
1979-1988 Cutlass
1982-1986 Bonneville
1979-1987 Grand Prix
1979-1981 Lemans
19.77 lbs

Billet Aluminum Hubs

• Strong lightweight aerospace material
• Profile milling results in extensive weight reduction
• Low friction ball bearings
• Factory greased for optimal metering
• Low friction seals & stainless seal rings
• Options include ceramic ball bearings & high resolution wheel speed sensor kit

Evolution S 11″ Dynamic Drive Mount (DDM) Stainless Steel Rotors – B2788AS
• DDM system secures the rotor and allows for rotor thermal expansion – drastically reducing warping, coning, and cracking which are common with bolt retention designs
• DDM billet aluminum hat design is secured by an internal Spirolox, eliminating heavy bolts and hardware- further reducing rotating weight
• Evolution S rotors are machined and fully ground from Stainless Steel that exhibits 48% greater yield strength at 1,000° F compared to carbon steel- further maintaining rotor integrity
• Stainless steel Evolution S rotors are highly resistant to heat and corrosion
• Unique Aero Slot design reduces rotating weight and promotes even heat dissipation- compared to common round drilled holes
• Scalloped design further reduces rotating weight
• 11″ O.D. / .280″ thickness (Discard at .260″)

Two Piston Billet Evolution 2 Caliper – B2570
• Compliance decreases 5% vs Pro Series
• Computer finite element analysis (FEA) optimized and field-tested caliper
• Evolution 2 design improves piston retraction, pedal feel, and stiffness
• High retraction piston and O-ring design to eliminate drag during acceleration
• Results in improved pad wear and exemplary braking efficiency
• Stainless steel pistons mitigate heat transfer to brake fluid
• Reverse dish pressure vessel piston maximizes stiffness
• Pistons are 1.750″ for increased clamping force

Aluminum Caliper Mounts
• Billet one piece design
• Eliminates bolts, spacers & nuts that require periodic maintenance
• Drilled & tapped to accept optional Hall effect sensor

DTC-30 Semi Metallic Brake Pads – B2510
• Best compound suited for front application