How to Reduce Boiler Pressure with Hot Water Specialist in Perth?

Is your boiler experiencing issues like leaks or damage? Have you checked the water pressure of your system? The ideal air pressure for most boilers sits between 1 to 1.5 bar when the system is cold. However, if it’s too high then your boiler may start giving some warning signs. So, if you are one of them who is already experiencing this and is unable to find out a solution then this blog is for you. It covers the experts tips on reducing boiler pressure from professional hot water specialist in Perth. 

Let’s check out what awaits you from below.

What are the Signs of High Boiler Pressure?

Boiler pressure rises up due to the following reasons. If you notice such signs then it’s time to connect with a hot water specialist in Perth.

    • Boiler pressure gauge reading goes above 2 bars

    • Hissing sound from your boiler

    • Leaks around boilers or radiators

How to Safely Reduce Boiler Pressure?

Here are the following steps recommended by hot water specialist in Perth that can help to reduce boiler pressure. 

• Turn Off Boiler Pressure: Switch off your boiler and allow it to cool completely. This reduces the chances of burns while adjusting the pressure.
• Locate the Drain Point: Refer from your manual to locate the pressure valve point. Release small amounts of water to bring the pressure down gradually.
• Bleed the Radiators: Such radiators releases the excess air trapped inside. Use the radiator key to gently let the air out and stop once the water begins to drip.
• Regular Monitoring: Keep an eye on your boiler pressure gauge on the next few days to ensure its stability.

When Should You Call a Hot Water Specialist in Perth?

If you have tried your best in reducing the pressure but it stands above 2 bars then requires professional attention. Moreover, persistent high pressure could indicate signs of:

    • Malfunctioning pressure relief valve

    • Expansion vessel problem

    • Blockages within the system or pipework

Managing boiler pressure is a key part in keeping your heating system safe and in working condition. You can always schedule a daily maintenance service from a professional hot water specialist in Perth for performance issues before they turn serious.