5 Things You Didn’t Know About Hardwood Flooring

by Tyler P. A Passionate Blogger - Entertainment Are you considering hardwood flooring in your home? Well, there are various things manufacturers will not tell you about this kind of flooring. Getting ideas regarding these key facts will save you thousands of pounds. Hardwood flooring has a comfort level for best performance. It has to be installed with a relative humidity ranging between 35 to 55 percent. The temperature is from 60 to 80 degrees Fahrenheit. This will give you the best comfort level you need. Here are 5 things you didn’t know about hardwood flooring.



Ideal moisture content

This varies differently according to the manufacturer. However, the approved average moisture content when handling hardwood flooring is about 6 to 9 percent. For subfloors with a moisture content of 12 percent and hardwood flooring at 9 percent, a difference of 3 percent is tolerable for installation. Though some movement is expected, expansion and contraction occur beyond these measurements.  An electric meter comes handy to test for the moisture content of the hardwood and subfloor.

Products vary in nature

The beauty of hardwood lies in the variations between boards and the rate at which they accept stain. Each piece has unique features which makes hardwood flooring luxurious and realistic in comparison to laminate floors. Special attention is required on the layout plus selection of colour and grain for each board. Working out with 4 to 5 boxes at a time during the installation is a great idea. It helps randomise the variations between the boxes of hardwood.

Floating floors

An important aspect regarding best hardwood floor installation is allowing installation gaps during installation of floating floors. Hardwood floors expand and contract just like dimensional lumber. So, enough space should is left on walls and posts for this movement. The size of the area should correspond to how large your place is. Expert installers always leave the gap recommended by manufacturers. Wood wall base or quarter round wood trim or a combination of the two is useful in covering the expansion gaps.

Proper acclimation

The moisture content of wood and subfloor should be ranging between 2 to 4 percent of each other. The subfloor moisture content doesn’t exceed 12 percent. You will get more problems as the percentage of subfloor moisture content increases. The material must achieve room temperature between 65 to 80 degrees Fahrenheit 24 hours before the installation. It means heat is required before installing the hardwood floor. For proper acclimation, keep the material according to manufacturer’s instructions.

Climatic control

Most home owners are dissatisfied with their hardwood floor installation when climatic control is not handled correctly. Proper temperature and humidity is required during hardwood installation. Failure to put in place appropriate climatic control measures leads to swelling of material during summer and gapping in winter. It explains why you’re advised to keep a pot of water on a wood stove when using it as a heat source.

Always care for your hardwood floors just like you do a wood dining table. Ensure to use professional hardwood installers, and you’ll be happy for years to come.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Dec 29th 2017 01:03. Viewed 279 times.

Comments