Articles

4 Tips to Remember Before Buying Safety Shoes in 2020

by Indent Now All You Need, When You Need It.

People who work in industrial areas or construction sites are prone to injuries on a daily basis. To avoid a mishap that might permanently damage vital body parts like feet, workers should wear safety shoes regularly. These shoes are specially manufactured to provide the maximum degree of security to the feet of people. Moreover, in factories where hazards can be encountered on every corner, workers must protect themselves and their feet. For this purpose, looking up online for safety shoes from brands like Tiger is advised as discounts, offers, and deals can be availed online almost at any time of the year. Besides this, consumers should also look for certain features in safety shoes by following the four crucial tips mentioned below: 




1. Check for Heat Resistance 


It has been a widely accepted fact each worker who is employed in a factory or construction site should be equipped with a pair of safety shoes while on the field. However, many people aren’t aware of features such as heat resistance that must be present in the shoes of these workers. For preventing excess heat generation within the sole and upper body of the shoes, this feature is essential for workers who labour in hard climatic conditions. Without heat resistance, a worker’s feet might experience extreme sunburns or scars. 

 

2. Inspect the Material 


Often times, people tend to lean towards shoes that cost them the least amount; however, their material and quality aren’t reliable at all. To avoid such a situation, it’s vital to remember that the material of safety shoes plays a key role in providing safety to factory workers. This is because sturdy materials like leather doesn’t get damaged easily and fully protect the feet in any hazardous situation. Additionally, workers suffering from hyperhidrosis or excessive sweating in the feet must purchase only leather safety shoes which can help in regulating this condition immensely. 

 

3. Focus on the Toe 


During the manufacturing process of safety shoes, the toe area is given a higher degree of protection by adding a steel cap. This extra layer helps in preventing damages to the toes during a mishap which has a major impact or compression. Hence, buying these type of steel-toe safety shoes online by brands like Tiger is highly recommended where workers can compare the costs on different sites. Besides this, these work boots are heavy, thus making them sturdier than its counterparts. 

 

4. Look for Electrical Insulation 


For factory and construction site workers, the risk of electric shock is very high as there are open sources of electricity left around. By wearing safety shoes which offer insulation from these hazards, workers can protect themselves easily. Therefore, non-conductive leather safety shoes are the best way to go for resolving this issue. Along with this, safety shoes should also be anti-static, so that the static present on workers’ bodies doesn’t cause any harm to them. 

 

5. Give Preference to Water Resistance 


One of the most vital features of safety shoes is water resistance as it solves several issues faced by workers. This feature ensures that water doesn’t enter inside the shoes, keeping workers’ feet dry at all times. Manufacturers use such a fabric in safety shoes that repels water so that working in weather conditions like heavy rains and snowfalls can be done seamlessly. Besides this, water-resistance shoes are breathable as well, thus avoiding feelings of suffocation or uneasiness in the workers. 

 


Sponsor Ads


About Indent Now Freshman   All You Need, When You Need It.

4 connections, 0 recommendations, 23 honor points.
Joined APSense since, July 19th, 2019, From Gurgaon, India.

Created on Jan 21st 2020 22:53. Viewed 322 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.