4 Tips for Storing Bottles in Wine Cellar Racks

by Isabel Blamey Professional writer

Have you purchased wine bottles? As you are not going to drink it right away, you need to store them in a safe place. It is useful to build wine cellar racks. These are the safest solutions for storing wines properly. Many wine lovers also keep them for aging to enjoy the divine taste of matured wines. Read this post to get details.

Building a wine cellar is not enough when you want to store bottles for aging. You have to follow the procedure of keeping wines in a good state. It’s useful to note that a number of factors could hamper the condition of wines. To enjoy its rich flavour and aromas, many people get an expert’s assistance. If you are on the same page, you must read this post to have a clear understanding of storage conditions.

Let’s discuss the top four tips for storing wine bottles in wine cellar racks-

1.Maintain the Right Temperature Inside the Cellar

If the temperature level keeps on fluctuating, it will hamper the usual taste of wines. In case the temperature gets increased, it could warm the bottles. It gradually boosts the aging process of wines. It is not recommended when you want to enjoy the real taste of wines. By hiring a top-rated contractor, you can ask him/her to install a good quality temperature-controlled unit.

2.Moisture Content Should Not Be Altered

For large cellars, a humidifier is installed to keep the moisture level unaltered. However, there is no need for such a unit when wine lovers build small-sized custom wine cellars. In both cases, you need to prevent the cork from getting dry. If it does happen, it could have an impact on the longevity of wines. So, keep a check on the moisture content to avoid dry out of the cork.

3.Store Bottles Side-by-Side Horizontally

Many wine fanatics prefer storing bottles in an upright position. It is not the ideal way of storing them because it could dry up the cork quickly. By keeping them sideways, you allow the wines to brush up the cork from inside and it remains moist from outside as well. In case you have purchased bottles with screw caps, it could be placed in the upright position for a limited period of time.

4.Protect Wine from Excess Light and Vibration

Wines that expose to direct sunlight or other forms of light would become unpalatable in a few days or weeks depending on the intensity of the light. In case noise/vibration is not reduced to zero, it could degrade the flavour of your wine. Thus, you have to ask the contractor to install vibrators, insulators, and low-heat generating LEDs. With this kind of approach, you can store wines in good condition.

Some Important Facts to Know

If you have pre-assembled wine storage, you must think about its renovation to give it a new look. It is also good to ask the dealer to check the equipment installed for its proper functioning. In case you are searching for a contractor to get your first cellar, you need to consider a few points first. It is crucial to determine your purpose for identifying the size of the cellar. It also helps in finding the right location.

For small wine cellar racks, the kitchen cabinet would be the ideal location. Some people prefer constructing large storage by renovating the storeroom or in the basement. An attached dining area is going to enhance its effectiveness such that you can invite your guests and spend quality time.

So, get your wine cellar design, built it today, and store wine bottles by following the discussed tips.

Author Bio: Bianca Bradfield is a reputed designer for building wine cellar racks in Australia. He has a wide collection of wine cellar designs including custom wine cellars. He is also an active blogger. In his posts, you can find information on reasons for building a wine cellar, benefits of installing cellar racks, and many more.