4 steps of easy French door replacement

by Webmaster Blogger SEO Expert

When it comes to French door replacement Durham, experts mention that it is not a complicated job until or unless, customers look it that way. Indeed, they further added that “there are only 4 simple steps to install or replace a traditional French door.” More often than not, homeowners fall of long guides on the internet for a French door or window replacement and quit before even giving it a try. Here are 5 simple steps for easy French door replacement by Replacement windows Durham. Take a glimpse:

Framing: construct the wooden outlines

Buy a framing kit according to the measurements of the entrance for which French door is being constructed. For average sized room entrance, the measurements could be 58” width and 82” height. If you are not completely sure, measure the outlines and then buy a framing kit. It is recommendable to buy a large framing kit than smaller than actual size because large can be cut down and fit, but smaller go un-utilizable.

Shimming and Levelling

Once, you have brought a perfect framing kit, start its parts to put together. For better-constructing results, use clamps as they help to fill in the gap between the wall and the frame. Some important factors to consider while shimming and leveling are: always wear safety glasses to avoid dust in the eyes, apply a high-quality sealer for long-lasting French door, and avoid much pressure on hands if you are suffering from any medical conditions.

Mounting Doors: the beauty starts here

Once, you have shimmed, levelled and installed the constructed frame kit into space, it is finally time to mount doors. Do not forget to dig out holes for installation of doorknobs, locks, and handles for door opening along with strike plate. If you are unsure about the installation of doorknobs and strike plates, call Window replacement Cary.

Give a finishing touch

If you must know as a non-professional door installer, at the end of the task, there could be few locations where the gap between door and push lock exist. This gap is filled using keenly framed and finished wooden strip. Thus, install the final wooden strip and you are good to go.

Note: If you are replacing your French door, it is important to recycle previously installed French door rather than throwing it away and becoming a threat to the environment.

For Window replacement services Durham, visit http://replacementwindowscary.com/.