3D Applications Of Rapid Prototype Tooling

The world has gone aboard when nothing can be really called as impossible. The industries and businesses are flooded which unique ideas and ways to make the human world better everyday. Such is the technology called Rapid Prototype Tooling, it is a 3D printing tool. It is a part of manufacturing process and builds layers to create a three-dimensional solid object from a digital model. Rapid prototyping china or the 3D computer-aided design (CAD) program is used in the process of printing the 3D object.
During the printing process, the 3D printer starts at the bottom of the design and builds up successive layers of material till a digital 3D file is finished. At tooling companies, they provide various options like CNC Machining, Stereolithography, Polyurethane Vacuum Casting and Selective Laser Sintering (SLS) to pick as per your requirement suits.
Various Applications Of Rapid Prototyping:
· Engineering models
· Anatomical models
· Proof of concept
· Visual models (working or static)
· Oversized displays/props
· Short run production parts
Types Of Rapid Prototyping:
1. CNC Machining: CNC machining provides you fast turn-around multi-axis-high speed for concept models, prototype parts and low-volume production components. They are available for applications in painting, silk screening, pad printing, polishing, sand blasting, anodizing, powder coating, plating, passivation, laser etching, knurling and so on.
2. Stereolithography: This type of rapid prototyping china is the most commonly used 3D printing process to create master patterns for urethane casting. Tooling companies offer you the requirements for concept models, prototype parts and low-volume production components and supply parts from one-off’s up to low-volume production quantities in a wide variety of materials, including plastics and metal. They are provides in various components of plastics and metals for product surface treatment.
3. Polyurethane Vacuum Casting: These rapid prototyping china are used for low volume 3d CAD model where each Silicone mold can make maximum 20 to 25 pieces. The parts are made out of a Polyurethanes properties close to real injected plastics such as ABS,PC, PA, POM ,PA, PP, TPE or TPR rubbers etc.
4. Selective Laser Sintering (SLS): Also known as laser sintering (LS), this process uses laser to build prototypes by sintering or fusing powdered material layer by layer from the bottom to up. The reduced strength between the fused particles tends to be weak than the machined parts or the moulded parts made from the same resin. Usually nylon based, the parts of SLS can be accurate and durable than SLA parts though the finishing can be poor with a grainy or sandy effect to it. The laser used in the process is used to trace out and cure a cross-section of the part design on the surface of the liquid resin and the process is further repeated.
The rapid prototype tooling is helping to produce even the most complex models with high quality and precision. This form of 3D Printing is a major advantage in the rapid prototyping china industries when it comes to factors like speed and economic saving.
Comments