3 Ways to Improve Your Automobile Business by Automotive Industry Marking Solutions

Introduction

With modern vehicles containing thousands of separated parts, many requiring to carry a particular part number, there is no room for error in the selection of marking equipment. 

Now, manufacturers are looking to global traceability and automotive industry marking solutions to increase their responsiveness and decrease the effect of vehicle recalls because of faulty parts.

In this blog, we have compiled three ways by which you can optimize your automobile business with automotive marking solutions.

Let’s begin...

What Is Automotive Marking 

The vehicle manufacturing process involves the assembling of different parts made by similar and distinctive automotive parts manufacturers. When there is no proper surveillance and part identification procedure, fabricating different parts can lead to problems. 

Hence, each part requires proper identification for effective tracing. The process by which part manufacturers recognize each part is known as automotive marking.

Does Automotive Marking Matters To Automobile Business

Definitely, automotive marking is a crucial set of procedures in the automotive industry. Because of two reasons. 

The first reason is that it assists part manufacturers to trace their components during as well as after assembling. With traceability, they can verify parts' location and records. And the cost can be saved. Consequently, this improves their company’s reputation.

The second reason is that vehicle manufacturer and customers can get components because of easy identification.

That’s why automotive marking matters to the automobile business.

Now, without further ado, let’s unpack the ways that you need to follow for improving your automobile business by automotive industry marking solutions.

1. Choose The Right Marking Method

Choosing the appropriate marking method comes with considering certain factors. And these factors rely on the automotive industry. The factors are as under:

• Surface 

Polished materials can become clear during marking. Hence, if you are working with one, you must texture it.

• Surface Roughness And Thickness

Surface roughness depends on the method you use. Use a Laser marking system for rough surfaces.

You should also observe the surface thickness of the material to avoid surface deformity. The marking depth should not be more than 1/10 the part thickness.

• Part Function

You should opt for non-intrusive methods for parts used in high-pressure and high-stress systems.    

2. Selecting the Right  Dot Peen Marker     

Manufacturers, if you want the best quality with dot peen marker, you need to consider certain factors

• Automotive Part Firmness

The indenting pin solidity is directly proportional to the component’s hardness. Hence a harder material needs a harder indenting pin.

• Automotive Part Outermost Layer’s Hardness

The part’s outermost layer where encoding occurs. So, handling the indenting force is mandatory. As a result, you must adjust the force to match the component’s thickness.

3. Use Non-Contact Printers

The production process is required to be successful and needs to run without any interruptions. There are certain coding printers that cause a problem as the quick-drying ink used in marking can become stopped around the print head.  

As a result, this can cause delays in automotive part marking when the printheads have to be cleaned before the manufacturing process starts again.

So, use Leibinger non-contact printers as it prevents any delay to automotive part marking because these printers have a special feature-its Sealtronic technology. 

This technology prevents the ink from being unnecessarily exposed to air. It means no clogging, no cleaning, and no delay in part marking.

Conclusion

With this discussion, you must follow these three tips if you want to grow your automobile business by automotive industry marking solutions.