123.hp.com/setup New Printer Setup & Driver Download

by Tom Cruss Blogger

There are three ways to install 123.hp.com/setup. The HP printer is a wireless one, the second is a USB cable, and the third is a network printer. Please make sure that the hp printer is connected to the same. Wi-Fi network as your system. Please enable the printer's Wi-Fi button so that it can be detected on a computer in the domain. Then from the Devices and Printer Control Panel, select your printer in the available range of printers, enter the appropriate key for the network that the printer selects. After doing this, your system will show a dialog box to complete the installation process. As soon as this process is complete, you will receive a message that the HP printer has been successfully configured.

Troubleshooting Printer Configuration Issues

Going through 123.hp.com/setup, do you end up with problems and errors? There are many tips and tricks to solve this.
If you can download the troubleshooting guide by visiting the 123.hp.com website then check.

Typing error:

If it is a typo, clean the junk inside your printer.
Verify id check printer settings.
If you use the mobile printing facility, then check the compatibility of mobile printing software.
Check the print settings before printing.

Software Error:

Check the software version.
If the version is not compatible, continue the uninstall version installation.
Always go to the software tab driver download tab and provide a valid version of the valid printer name.

Network transient problems

If you have completed network problems, print the network test page. Do not use the wrong credentials for your network.
Disconnect the device from an existing connection next Try to select an alternate connection.
Online printer. Do not let your printer go offline. Use the print tool Scan Doctor tool to quickly scan for online error messages. Click Fix Printing Fix Fix Scanning to launch the tool.
Manual recovery. Disconnect the connected cable. Turn on the device. Turn it on after a while. If auto-reset is your choice, make sure that compatible settings are available.
Check the connected device. Do not use the wrong port to connect the device. It is always recommended to use a good quality cable to use with HP.
Scan your device. Use a compatible HP printer scanning tool. It is better to remove the external software installed on your printer.

123.hp.com/setup guide Use the printer support number to get an idea of the troubleshooting guide. Wait for + 1-888-303-0802 to reply to agents.