Steps to Change the Ink in a Epson Printer

Undoubtedly, Epson Printers are one of the top brands in the world of printing; however, a few technical errors are common, which are required to be resolved properly. In most cases, the problem is mostly related to the ink or the cartridge, making it difficult for the user to print smoothly. So, if you are also facing any problem related to the ink, the most preferable solution is by changing the ink. In case, if you are thinking about the procedure of changing the ink, you can anytime take help Epson Technical Support. Also, you will be guided with steps, if you go through this blog completely.

• At first, you need to check whether the printer is on or not. If the power light is on, but not flashing, you can be sure that your printer is turned on.
• Once you have switched it on, make sure you have open the printer cover by lowering the output tray.
• Just after the lowering of the output tray has been completed, make sure that you have successfully pressed the “ink” button. Just after the clicking process is done, the user will have to notice a head move into the ink cartridges replacement position and the power flight will start flashing.
• You must be assured that nobody has pressed the ink button for more than three seconds as this may cause the printer to initiate its print head cleaning command.
• Now you need to open and remove the ink cartridge that you wish to replace by pinching its sides. Also you should not forget to dispose of the cartridge properly and not to refill it.
• Placement of the replacement ink cartridge into the slot into cartridge holder until you hear it click into place. You must also avoid using too much force when inserting the cartridge into the holder.
• You need to ensure that you have closed the cover of cartridge and printer after you are done replacing the ink cartridge.
• As you are landing to the last step, you need to be assured that pressing the ink button and waiting for the printer to initiate its ink recovery system is must.

Once you are done with the above-mentioned steps, you can be sure of the fact that your process is completed. But if you got stuck in the middle of the procedure, don’t forget to give call to Epson customer service number in order to resolve all your queries. Also, if you don’t have their number, you can easily avail it from Contactforhelp, which is an online directory.


Article Source: https://goo.gl/tU2aZE

Report this Page